Ongoing Employment Opportunities in a Construction Company

A key player in the Engineering, Construction and Procurement industry located in Warri – Delta State & Lekki – Lagos State, with a focus on being the leading provider of sourcing, contracting, procurement and supply services is recruiting to fill the position below:

Job Title: Health, Safety, and Environment (HSE) Officer

Location: Warri, Delta
Employment Type: Full-time

Key Responsibilities

• Conduct daily HSE meetings and inspections.
• Ensure correct documentation of incidents and accidents including near-misses.
• Ensure enforcement of the HSE Policies, procedures, PPEs, Permit to Work system (PTW) and compliance of regulatory requirements.
• Coordinate the training of personnel in areas of safety, including first aid, CPR, accident prevention and investigation, workplace inspections, and other matters related to implementing safety procedures in facilities.
• Make sure that personal protective equipment, such as dust masks, safety glasses, footwear, and safety helmets, is being used in workplaces according to regulations.
• Maintain effective relationships with relevant external agencies and emergency response service providers (e.g. Fire Service, emergency services, HMO, environmental agency, etc.)
• Ensure that the business is compliant with statutory, regulatory, industry, and other HSE requirements.
• Conduct risk assessments and enforce preventive measures.
• Making recommendations following accidents/incidents.
• Providing health and safety training courses for employees and managers.
• Drawing up safe operational procedures.
• Prepare reports on occurrences and provide statistical information to management.
• Ensure safety critical elements are inspected and maintained as per plans.
• Prepare and update site specific HSE procedures and documents.
• Support on-site implementation of HSE training programs.
• Develop and implement emergency drills.
• Ensure lessons learnt from incident investigations are disseminated to all employees and contractors throughout the site.
• Ensure accurate incident reporting.
• Tracking and closing out of HSE action items, including actions from internal and external audit findings.
• Participate in PHR’s, HAZID and HAZOP studies for the site when required.
• Assess compliance through recurrent safety audits.
• Help and challenge the company in defining their annual Health & Safety plan.
• Consolidate all levels of the company’s performance indicators.
• Develop close communication within and across business units.

Qualifications / Competencies

• Degree in Engineering or Technical Fields.
• HSE Certifications (NEBOSH, IGC & ISPON Certified)
• Minimum of 5 years’ experience in HSE
• Good communication skills
• Extensive knowledge of container terminal operational activities
• Effective negotiation, conflict resolution and strong influencing skills
• Ability to provide leadership, obtain cooperation and assistance to meet objectives
• Proficiency in English
• Excellent knowledge of Microsoft Office applications
• Must possess a valid driver’s license with driving experience (manual transmission).

Remuneration
Attractive with added Benefits.

Application Closing Date
Sunday; 7th January, 2024.

How to Apply
Interested and qualified candidates should send their updated Resumes / CV to: resourceful.hire22@gmail.com using the Job Title as the subject of the email.

Note: Applicants MUST be residents in Warri, Delta State or be willing to relocate at Applicants’ cost if successful.

Job Title: Civil / Structural Engineer

Location: Warri, Delta
Employment Type: Full-time

Key Responsibilities

• Responsible for designing, planning, and overseeing construction projects, ensuring compliance with industry standards, safety regulations, and project specifications.
• Conduct site assessments and surveys to identify project requirements and constraints.
• Managing all Civil/Structural design activities and an interface between design and construction teams to ensure constructability of all design deliverables.
• Prepare Structural design and deliverables for feasibility studies, conceptual/basic engineering, FEED, and DED.
• Collaborate with multidisciplinary teams to integrate civil engineering aspects into overall project plans.
• Prepare project cost estimates and timelines, ensuring adherence to budgetary constraints.
• Oversee construction activities, ensuring quality control and compliance with design specifications.
• Monitor and manage project progress, identifying and resolving issues to meet project deadlines.
• Coordinate with regulatory agencies to secure necessary approvals and permits.
• Conduct risk assessments and implement mitigation strategies to ensure project success.
• Provide technical expertise and support to project teams and stakeholders.
• Stay updated on industry trends, best practices, and advancements in civil engineering for the oil and gas sector.
• Perform any other duty that may be assigned by Supervisor/Engineering Manager.

Qualifications / Competencies

• Bachelor’s Degree in Civil Engineering or a related field.
• Must be COREN certified
• Minimum of 5 years of experience in civil/structural engineering, with a focus on oil and gas projects.
• Knowledge of major engineering and design software such as AutoCAD 2D, SACS and STAAD.Pro.
• Conversant with National and International Codes, Standards, and Engineering Practices used in the industry AISC, Eurocodes, other relevant international standards, and company specifications.
• In-depth knowledge of industry standards, codes, and regulations.
• Excellent project management and organizational skills.
• Effective communication skills for collaboration with internal teams, clients, and regulatory bodies.
• Ability to work in a fast-paced environment and adapt to changing project requirements.
• Strong problem-solving and decision-making abilities.

Remuneration
Attractive with added Benefits.

Application Closing Date
Sunday; 7th January, 2024.

How to Apply
Interested and qualified candidates should send their updated Resumes / CV to: resourceful.hire22@gmail.com using the Job Title as the subject of the email.

Note: Applicants MUST be residents in Warri, Delta State or be willing to relocate at Applicants’ cost if successful.

Job Title: Electrical Engineer

Location: Warri, Delta
Employment Type: Full-time

Key Responsibilities

• Preparation or review of electrical / instrument design deliverables such as Philosophies, Specifications, Single Line Diagrams, Schedules, Datasets, and preparation of technical requisitions for long lead items, etc.
• Be the focal point for the resolution of all Electrical and Instrumentation engineering related matters across the Organization’s Oil and Gas facilities.
• Provide Electrical and instrumentation engineering input to other discipline Engineers to ensure optimal designs and ensure design outputs are consistent.
• Active participation in relevant technical reviews such as Design Reviews, HAZOP, SAFOP, SIL, 3D Model, Constructability, etc.
• Assist in the development and completion of Electrical/ Instrumentation/Controls check sheets and checklists for Mechanical Completions, Pre-commissioning and Commissioning.
• Act as the Company representative (as required) to ensure that design work by contractors meets Company specifications and relevant industry codes and standards.
• Ensure that engineering design and work packages are structured properly for effective execution.
• Evaluate technical issues relating to preparation of proposals, and evaluation of equipment for adherence to required performance criteria.
• Perform Electrical and Instrumentation equipment purchasing tasks, such as vendor bid inquiry preparation, vendor bid analysis and vendor selection.
• Review and approve instrument and electrical equipment vendor technical proposals, drawings, operating and maintenance manuals etc., and attend FAT/shop tests, as needed.
• Assist in the resolution of field problems during construction, assessing field recommendations on change, and in the implementation of efficient corrections that can reduce operational problems.
• Coordinate the scope definition, planning, and execution of Electrical and instrumentation equipment upgrade or modification projects.
• Provide adequate Electrical and instrumentation technical support to ongoing Operations on all Organization’s Operating Assets.
• Interface with other disciplines as necessary, to provide support and resolve challenges.
• Ensure compliance with the Company’s ISO Quality Procedures, Project Quality Plan and Design Integrity processes and procedures.
• Take full ownership of assigned tasks, while interfacing with other disciplines, departments, and business units in order to successfully complete tasks.

Qualifications / Competencies

• Bachelor’s Degree in Electrical Engineering.
• 5 – 8 years cognate experience in Electrical Engineering in the Oil & Gas industry particularly in the areas of design (conceptual to detailed Engineering), construction, commissioning, start-up and operations of electrical equipment and installations.
• Proven knowledge of electrical, instrumentation, and control systems software, tools and techniques
• Knowledge of relevant national and international regulations, specifications, codes and standards
• Ability to Identify and proffer solutions to Electrical, Instrumentation and Cathodic protection challenges across the facilities.
• Possess knowledge of Caterpillar Engines, Compressors and other electrically driven running equipment
• Highly assertive with effective project management skills
• Knowledge of Safety and Quality procedures
• Must be COREN certified.
• A team player with excellent analytical, problem solving and communication (written and verbal) skills
• Ability to distil problems, establish evidence-based facts, determine accurate conclusions, make recommendations and take firm decisions
• Ability to multi-task and meet deadline
• Flexible and proactive approach to work and willing to work outside core business hours as required.

Remuneration
Attractive with added Benefits.

Application Closing Date
Sunday; 7th January, 2024.

How to Apply
Interested and qualified candidates should send their updated Resumes / CV to:resourceful.hire22@gmail.com using the Job Title as the subject of the email.

Note: Applicants MUST be residents in Warri, Delta State or be willing to relocate at Applicants’ cost if successful.

Job Title: Mechanical Engineer

Location: Warri, Delta
Employment Type: Full-time

Key Responsibilities

• Perform technical related to design, verification or study activities of Columns, Vessels, Shell and Tube Heat Exchangers, Storage Tanks, Air Coolers etc
• Conduct regular inspections to identify faulty equipment, coordinate repairs, and keep records of equipment manuals and user guides as well as maintenance practices and repair work done on all facilities and equipment.
• Assessing mechanical equipment and maintenance requirements.
• Measuring the performance of mechanical components, devices and engines.
• Carry out Preventive maintenance with timescales and specifications with company’s policy.
• Modifying and maintaining equipment and the processes that support them.
• Using computer-aided design/modeling software.
• Liaising with contractors and supervising their job.
• Undertaking research on equipment performance.
• Producing and implementing designs and test procedures.
• Carrying out risk assessments on the viability of mechanical jobs.
• Presenting designs to managers and clients.
• Testing, evaluating, modifying, and re-testing products/equipment.
• Writing reports and documentation.
• Providing technical advice.
• Analyzing and interpreting data and engineering drawings.
• Managing projects, costs, and people.
• Carrying out Preventive, Corrective, and Predictive maintenance.
• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for better testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and the project stays within budget etc.

Qualifications / Competencies

• B.Sc Degrees in Mechanical Engineering
• 5 – 10 years of Technical and Mechanical Engineering experience
• Must be COREN certified
• Relevant Project, Professional and Safety Certifications
• Proven working experience in mechanical engineering
• Hands-on experience with computer-aided engineering (CAM)
• Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
• Solid understanding of core concepts including mechanics, kinematics, thermodynamics, materials science etc.
• Creativity and analytical skills
• Ability to communicate technical knowledge in a clear and understandable manner
• Technical writing skills.

Remuneration
Attractive with added Benefits.

Application Closing Date
Sunday; 7th January, 2024.

How to Apply
Interested and qualified candidates should send their updated Resumes / CV to: resourceful.hire22@gmail.com using the Job Title as the subject of the email.

Note: Applicants MUST be residents in Warri, Delta State or be willing to relocate at Applicants’ cost if successful.