Recruitment at Western Development Company Limited

Job Title: Mechanical Engineer, Maintenance Services – SOKU

Location: Rivers
Job Type: Contract
Gender: Male / Female
Job Category: Engineering

Roles and Responsibilities

• Collect and review logs of equipment parameters, and identify equipment deviation outside normal operating parameters.
• Participate in the preparation of work method statements, risk assessments and job hazard analysis
• Specify personal protective equipment (PPE), and appropriate documentation and prepare a Permit for work activity.
• Carry out site preparation tasks in readiness for maintenance activity.
• Identify and stage materials, equipment spares and tools for equipment maintenance.
• Verify isolation of energy sources in preparation for maintenance work
• Execute routine maintenance activities in line with original equipment manufacturer (OEM) and company standards.
• Troubleshoot and analyze equipment faults using diagnostic tools, test devices and measuring instruments.
• Support OEM field service representatives during the execution of major equipment maintenance activities.
• Conduct proper housekeeping and restore the work site safely after job completion.
• Identify critical spares for ordering ahead of planned maintenance activities
• Review equipment performance data post maintenance work and update equipment maintenance records
• Perform reviews of operating/maintenance procedures and maintenance job routines.
• Analyze maintenance effectiveness and productivity, propose changes to existing practices, and develop and implement improvement actions.
• Support planning of mechanical scope of major / turnaround/milestone maintenance activities.
• Participate in equipment failure investigation (root cause analysis) and apply causal learning to problem-solving
• Propose solutions to address the causes of undesirable equipment performance.
• Support the development of credible look-ahead plans for work activities
• Comply with site HSE practices and procedures.
• Participate in HSE meetings and promote site safety campaigns
• Close out all other assigned actions in line with audit findings.

Academic Qualification
Possession of any of the following Qualifications:

• HND in Engineering from accredited Polytechnics or Monotechnic
• B.Eng./B.Sc./B.Tech in Engineering from an accredited University or College
• Age: Not Available

Work Experience:

• Minimum of eight (5) years of relevant professional engineering experience within the Oil and Gas Industry
• A four (4) year fieldwork experience within SPDC East Asset operations will be an added advantage.

Skills:
Must possess the following competencies

• Maintenance of Rotating Equipment – Gas & Diesel Engines, Gas Turbines, Reciprocating & Centrifugal Pumps, Gas Compressors, Air Compressors, Blowers etc.
• Knowledge of pumps, engines, compressors and other rotating equipment used within the oil and gas industry
• Evaluate and interpret equipment performance and integrity data
• Recognize and respond to abnormal conditions and take appropriate corrective action
• Troubleshoot, diagnose and resolve common faults on rotating equipment
• Plan and conduct maintenance activities in line with recognized procedures and standards
• Apply approved procedures and standards for disassembly and reassembly of rotating equipment components.
• Plan and conduct major inspection and overhaul of equipment
• Use of the appropriate tools and equipment
• Execute condition monitoring activities using appropriate diagnostic tools
• Support equipment shutdown, start-up, isolation and reinstatement as part of the maintenance process.

Static Equipment Maintenance:

• Identify the various types of static equipment within the oil and gas industry
• Provide support during inspection activities i.e removal and reinstatement of static equipment
• Carryout inspection of filters/strainers and valves

General:

• Knowledge of basic mechanical tools and workshop machinery.
• Interpret machinery/equipment information from drawings, diagrams and technical manuals
• Knowledge of alignment of shafts, couplings, belts and pulleys on equipment

Soft Skills (Added advantage):

• Computer literate, ability to perform basic computer-related activities
• Competent user of Microsoft Office applications
• Knowledge of worksite hazard management and permit-to-work systems
• Effective team player and ability to work in a multidisciplinary team
• Good communication & presentation skills
• Good time management and organizational skills
• Ability to adapt promptly to change
• Ability to prioritize tasks and deliver work under pressure.
• Self-motivated and able to deliver tasks under minimal supervision

Work Cycle:

• The work location is field-based in swamp terrain located in Soku, Rivers State.
• Work schedule is 21 / 21 days duty cycle.
• Work activity period spans 12 hours (7 am to 7 pm) routine over the 21-day duty period.
• Work activity may extend beyond the normal period depending on business needs.

Application Closing Date
14th September, 2024.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Senior Supervisor, Operations Maintenance Contract Engineering Services – SOKU

Location: Rivers
Job Category: Engineering
Job Type: Contract

Roles and Responsibilities
The Field Operator Supervisor will be responsible for the following:

• Lead a team of operators to deliver simple and complex activities in the plant.
• Manage the shutdown permitry and isolation management process.
• Apply the emergency response procedure where and when necessary.
• Report and close out UA/UC.
• Serve as PTW signatory.
• Apply the HSSE policy and legislation applicable to crude oil transfer and export.
• Adhere to plant operational procedures.
• Monitor, control, and record production rates and performance.
• Start up wells and facilities (hot and cold start).
• Perform basic troubleshooting on wells and facilities to ensure stability.
• Perform daily first-line monitoring of process parameters and variables.
• Gather daily production data and determine the production performance.
• Participate in console review meetings, daily notifications, and YTT review meetings.
• Prepare daily production reports for DPR.
• Execute daily communication and shift handover.
• Ensure optimized chemical injection rates are followed as advised.
• Prepare equipment for maintenance interventions, plant isolation, etc.
• Collaborate with other disciplines to execute planned activities.
• Prepare the wells and facilities/equipment for (re)commencement of production/processing.
• Perform monthly well tests and sampling of producing wells.
• Perform periodic well integrity assurance tasks and activities.
• Supervise the preparation of equipment for maintenance, including isolation, draining, steaming, and other procedures as required.

Work Cycle:

• The work location is a swamp field based in Soku Shell Facilities, accessible via land and air.
• The job activity period is daily on a 12-hour (7 am to 7 pm) routine over a 21-day period.
• There is a standard 3-weeks on and 3-weeks off schedule.
• The successful candidate will manage their absences with their contractor for suitably qualified covers.
• There may be a need for periodic visits to the Shell industrial area for training and official assignments.
• Personnel may be required to work extended hours as the need arises.

Requirements

• Academics: A higher qualification (HND / Bachelor) in any Science or Engineering discipline.
• Gender: Male/Female.

Work Experience:

• Minimum of 5 years working as a field operations support, technician, or permit coordinator in an oil and gas producing field location.
• Must have at least five (5) years of experience in SPDC.

Skills (Added advantage):

• Ability to read and interpret process engineering flow schemes (PEFS) and process drawings.
• Skill level knowledge in running/managing in permit coordination.
• Basic understanding of Distributed Control System, preferably Yokogawa DCS.
• Computer literate with proficiency in Microsoft Office tools (Outlook, Excel, PowerPoint, and Word).
• Excellent verbal and oral communication skills.
• Problem-solving and good analytical skills.
• Self-motivated and performs under minimal supervision.
• Demonstration of full knowledge of wellhead systems & integrity management (installation, completion, and testing of various components and seals).
• Experience in actuator valves and ESD systems operation.
• Experience in oil wellhead operations and troubleshooting skills.
• A good understanding of the working principles of field instrumentation and process automation systems.

Soft Skills:

• Ability to understand and perform production operations (volume, pressure) calculations.
• Ability to understand the unit of various variables, i.e., pressure, volume, flow rate, etc.
• Onsite hazards identification and risk assessment capability.
• Flexibility and adaptability.
• Problem-solving and good analytical skills.

Application Closing Date
14th September, 2024.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Electrical Engineer, Maintenance Services – SOKU

Location: Rivers
Job Type: Contract
Job Category: Engineering
Gender: Male / Female

Roles and Responsibilities

• Assess health of electrical equipment, identify equipment deviation outside normal operating parameters.
• Participate in preparation of work method statements, risk assessments and job hazard analysis
• Specify personal protective equipment (PPE), appropriate documentation and prepare Permit for work activity.
• Carryout site preparation tasks in readiness for maintenance activity.
• Identify and stage materials, equipment spares and tools for equipment maintenance.
• Plan and implement isolation of energy source in preparation for maintenance work
• Execute routine maintenance activities in line with original equipment manufacturer (OEM) and company standards.
• Troubleshoot and analyze electrical equipment faults using diagnostic tools, test devices and measuring instruments.
• Support OEM field service representatives during execution of major equipment maintenance activities.
• Conduct proper housekeeping and restore work site to a safe state after job completion.
• Identify critical spares for ordering ahead of planned maintenance activities
• Review equipment performance data post maintenance work and update equipment maintenance records
• Perform reviews of operating / maintenance procedure and maintenance job routines.
• Analyze maintenance effectiveness and productivity, propose changes to existing practices, develop and implement improvement actions.
• Support planning of electrical scope of major / turnaround / milestone maintenance activities.
• Participate in equipment failure investigation (root cause analysis) and apply causal learning to problem solving
• Propose solutions to address the causes of undesirable equipment performance.
• Support development of credible look ahead plans for work activities
• Comply with site HSE practices and procedures.
• Participate in HSE meetings and site safety campaigns
• Close out all other assigned actions in line with audit findings.

Academic Qualification
Possession of any of the following Qualifications

• HND in Engineering from accredited Polytechnics or Monotechnic
• B.Eng / B.Sc / B.Tech in Engineering from accredited University or College
• Age: Not Applicable

Work Experience:

• Minimum of eight (5) years relevant professional engineering experience within the Oil and Gas Industry
• A four (4) year field work experience within SPDC East Asset operations will be an added advantage.

Skills:
Must possess the following competences

Electrical Safety:

• Application of electrical safety rules, identification, and mitigation of hazards.
• Knowledge of electrical standards as well as electrical protection and control systems.
• Methods of repair of Ex-equipment, including limitations and certification requirements.

Maintenance of Electrical Equipment:

• Identify the various electrical low voltage (LV) equipment – generators, motors, lighting, heat tracing, switchgear, small transformers, UPS and batteries).
• Identify the various high voltage (HV) equipment – generators, motors, large transformers, switchgear)
• Evaluate and interpret equipment performance and integrity data
• Recognize and respond to abnormal conditions and take appropriate corrective action on LV / HV equipment
• Troubleshoot, diagnose and resolve common faults on electrical equipment
• Plan and conduct maintenance activities in line with recognized procedures and standards
• Apply approved procedures and standards for disassembly and reassembly of electrical equipment
• Use of the appropriate tools and equipment
• Execute condition monitoring activities using appropriate diagnostic tools
• Support equipment shutdown, start up, isolation and re-instatement as part of the maintenance process

Other Electrical Maintenance:

• Perform routine maintenance of the earthing and lighting system
• Perform lighting system maintenance around the Facility.
• Knowledge of maintenance routines on cathodic protection systems

General:

• Knowledge of basic electrical tools and workshop machinery.
• Knowledge of area classification layouts and electrical equipment for hazardous areas
• Interpret information contained in the various types of electrical drawings.

Soft Skills (Added advantage):

• Computer literate, ability to perform basic computer related activities
• Competent user of Microsoft Office applications
• Knowledge of worksite hazard management and permit to work systems
• Effective team player and ability to work in multidisciplinary team
• Good communication & presentation skills
• Good time management and organizational skills
• Ability to adapt promptly to change
• Ability to prioritize tasks and work under pressure.
• Self-motivated and ability to deliver tasks under minimal supervision

Work Cycle:

• The work location is field based in swamp terrain located in Soku, Rivers State.
• Work schedule is 21 / 21 days duty cycle.
• Work activity period spans 12-hours (7am to 7pm) routine over the 21-day duty period.
• Work activity may extend beyond the normal period depending on business needs.

Application Closing Date
14th September, 2024.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: HSSE Supervision Services Officer – SOKU

Location: Rivers
Job Type: Contract
Job Category: Engineering

Key Expectations

• Deliver on targets and assignments specifically to field operations.
• Act as operations HSE Coaches and liaising with the onsite HSE team to deliver on HSSE plans and targets
• Be able to work and deliver under pressure.
• Ability to learn and develop quickly.
• Ability to think outside the box and suggest new and original ideas.
• Ensure that all unsafe acts/Unsafe conditions are reported and followed up to closure.

Specifically, he/she will:

• Must be skilled in Engaging Differently, with the ability to influence behavior without administrative authority.
• A passionate personality that is yet empathic
• Good monitoring and reporting implementation of controls and performance as well as highlighting trends.

Requirements

• Academics: A First University Degree or HND in Engineering or Sciences
• Age: <= 55 years
• Work Experience: Must have experience working in HSSE role, field Operations or document control within an Oil& Gas facility
• Technology Platforms: Adept at working with enterprise Microsoft Office Suite (Excel, Power Point, Skype, MS Teams); SharePoint, excel and smart phones
• Professional Certifications: Must be a level-3 certificate holder in HSE-MS planning, implementation and auditing, and member of any local or international safety professional bodies or emergency response institutes such as NISP, NEBOSRH, OPITO Emergency Accredited Training Centers, Nigerian Red Cross Society, UK-Ambulance Brigade, RoSPA, UK-s HSE Examination Boards, OHSAS, bsi, ISM, IRCA, etc.

Technical Skills:

• The candidate must be a seasoned and experienced field operator with HSE background having not less than 5-years professional field operations and safety experience in oil and gas, hospitality, education, construction, energy or transportation industry.
• A deep knowledge of the document control, permit to work system and the use of daily operations tracking tool is expected.

Soft skills required:

• Problem-solving, good analytical, and presentation skills;
• Good Communication & team-working disposition;
• Good organizational and Networking skills;
• Flexible, adaptable, and a fast learner;
• Respects and values opinions of others, a person of integrity, and good at Coaching and Mentoring;
• A commitment to continuing own professional development, and a learner’s mindset;
• The ability to create and maintain cordial working relationships with colleagues and customers
• Good understanding of legislation, statutory requirements, and information management such as Data Privacy, etc.

Work Schedule/ Location:

• The work location is field based in swamp terrain located in Soku, Rivers State.
• Work schedule is 21 / 21 days duty cycle.
• Work activity period spans 12-hours (7am to 7pm) routine over the 21-day duty period.
• Work activity may extend beyond the normal period depending on business needs.

Application Closing Date
14th September, 2024.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Field Operations Supervision Services Officer – SOKU

Location: Rivers
Job Type: Contract
Gender: Male / Female
Job Category: Engineering

Roles and Responsibilities
The Field Operator Supervisor will be responsible for the following:

• Lead a team of operators to deliver simple and complex activities in the plant.
• Manage the shutdown permitry and isolation management process.
• Apply the emergency response procedure where and when necessary.
• Report and close out UA/UC.
• Serves as PTW signatory
• Apply the HSSE policy, legislations applicable to crude oil transfer and export.
• Adhere to plant operational procedures.
• Monitor, control and record production rates and performance.
• Start-up wells and facilities (hot and cold start).
• Perform basic troubleshooting on wells and facilities to ensure stability.
• Perform daily first line monitoring of process parameters and variables.
• Gather daily production data, determine the production performance.
• Participate in console review meeting, Daily notification and YTT review meeting
• Prepare daily production report for DPR
• Execute daily communication and Shift handover
• Ensure optimized chemical injection rates are followed as advised.
• Prepare equipment for maintenance interventions plant isolation etc.
• Collaborate with other disciplines to execute planned activities.
• Prepare the wells and facilities/equipment for (re) commencement of production/processing.
• Perform monthly well test and sampling of producing wells.
• Perform periodic well integrity assurance tasks and activities.
• Supervise preparation of equipment for maintenance including isolation, draining, steaming, and other procedures as required.

Requirements
Academics:

• A higher qualification (HND / Bachelor’s) in any Science or Engineering discipline.

Work Experience:

• Minimum of 5 years working as a field operations support, technician or permit coordinator in an oil and gas producing field location.
• Must have at least five (5) years’ experience in SPDC.

Skills:

• Ability to read and interpret process engineering flow schemes (PEFS) and process drawings.
• Skill level knowledge in running/managing in permit coordination.
• Basic understanding of Distributed control system. Preferably Yokogawa DCS
• Computer literate with proficiency in Microsoft office tools (Outlook, Excel, PowerPoint, and Word)
• Excellent verbal and oral communication skills
• Problem-solving and good analytical skills.
• Self-Motivated and performs under minimal supervision
• Demonstration of a full knowledge of wellhead systems & integrity management (installation, completion and testing of various components and seals)
• Experience in actuator valves and ESD systems operation.
• Experience in oil wellhead operations and troubleshooting skills.
• A good understanding of the working principles of field instrumentation and process automation systems.
• Soft Skills    Ability to understand and perform production operations (volume, pressure) calculation.
• Ability to understand unit of various variables i.e., pressure, volume, flowrate etc.
• Onsite Hazards identification and Risk assessment capability.
• Flexibility and adaptability.
• Problem-solving and good analytical skills.

Work Cycle:

• The work location is a land-field based in Soku Shell Facilities accessible via land and Air.
• The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
• There is a standard 3-weeks on and 3-weeks off schedule.
• The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
• There may be need for periodic visits to Shell industrial area for trainings and official assignments.
• Personnel may be required to work extended hours as need may arises.

Application Closing Date
14th September, 2024.

How to Apply
Interested and qualified candidates should:
Click here to apply online