TechnipFMC | Recruitment

Job Title: HSE Representative

Requisition number: 7956
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Executes the HSE Plan and any other Project requirements, taking into account Group HSE standards, and provides expert advice and support at project and site level.

Job Description

• Train, monitor and coach shop/site, office and field team members to improve skill level, to ensure adherence to principles, procedures, policies and standards to improve safety, health and environmental processes in a reliable and cost effective manner.
• Proactively manages safety, health and environmental issues and ensures compliance with Federal, State, Local and Corporate requirements / standards relating to recordkeeping, permits, reports, training and other related concerns.
• Ensures that issues are identified and addressed in a timely manner.
• Takes responsibility and accountability for Safety; will not take or accept short cuts; responsibility will be taken to intervene or stop the job if required.
• Lead incident investigations and facilitates communications, problem resolution, and appropriate feedback, both positive and corrective within the teams. Develop reports and communication of incidents and recommended preventative measures to be distributed within TechnipFMC.
• Gather all information that could affect TechnipFMC and analyze information to make forecasts and recommendations. Create and plan ways to reduce occasions of risks by assisting various project teams with HSE related issues such as Job Safety Analysis (JSA), Risk Assessment, HAZIDS, etc.
• Ensure all work related medical, first aid and case management are well managed. Leads Emergency Response Team (ERT) as required. Monitor issues related to medical service providers such as clinics, hospitals and company doctors (for work related issues) and relate to the Manager & HR.
• Collects, analyzes, and reports HSE performance statistics for the site
• Ensure the development, review, and update of HSE deliverables
• Identifies trends regarding the recurrence of accidents/incidents/near misses and provides feedback to Projects as necessary.

Requirements
You are meant for this job if:

• Diploma or Degree in a related field.
• 8-10 years’ relevant work experience in this field preferred
• Possess good PC skills and knowledge of word processing, spreadsheet and presentation software. Possess effective leadership ability within a team environment.
• Demonstrate exceptional negotiation, motivating, planning, presentation, interpersonal and communication skills.
• Maintain the ability to handle multiple tasks and changing priorities in a fast-paced environment.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Senior Project Manager

Requisition number: 7730
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Within the framework of company’s values, policies, and contract commitments (including HSES, quality, time & cost), the Project Manager is accountable for project timely delivery and Profit & Loss by managing all project activities and resources while ensuring client satisfaction.

Responsibilities

• Plans, manages and coordinates assigned projects typically consisting of large Engineering, Procurement, Construction, and Installation contracts. Typically manages projects involving multi-sites and/or remote installation locations. Manages the detailed technical schedule and financial performance of the project to deliver a quality product, on time, and at the lowest achievable cost.
• Serves as the primary point of contact for the customer after the sale as assigned. Builds and maintains a relationship with the customer and other suppliers associated with the Project.
• Preliminary planning of project work to consist of developing and communicating schedules, allocating assets, and attending pre-job meetings with the project teams to understand requirements.
• Participates in the quotation process and provides project management-related information such as schedules and budgets.
• Project execution, inclusive of monitoring and tracking baseline schedules comparatively to actual. Ensuring project schedules are maintained and met. Verification of equipment availability and readiness by working with other groups.
• Tracking and reporting project expenditures associated with labor, materials, vendors, and other miscellaneous costs. Identifies, tracks, and documents variances to the original work scope and reports them to the Technical Manager.
• Performs frequent inventory assessments and formally reports findings back to the Technical Manager. Accurately captures asset departure and return dates.
• Assists in the generation of local work instructions and process improvements related to asset locations and availability.
• Eradicates schedule issues by working with the Technical Manager and project teams.

Requirements
You are meant for this job if:

• You are a Nigerian
• Engineering degree or equivalent diploma
• 8 years of experience as a project engineer
• Professional English proficiency
• Excellent understanding of on-offshore/subsea projects, including relevant equipment, operations, and services
• Ability to lead functional project teams and manage critical timelines with the goal to streamline and provide critical customer service

Skills:

• Completion of PMP (Project Management Professional) Certification.
• MBA or equivalent business experience.
• Must demonstrate a thorough understanding of Project Management techniques and standards.
• 15 years Project Management experience on Subsea Production Systems projects with advanced knowledge of Subsea Production Hardware.
• 15 years relevant experience in Engineering, Scheduling, Procurement, Planning, cost or Quality Assurance plus 15 years’ experience in a Project Management function.
• BS Degree in Business Administration, Engineering, Procurement, Operations or related field.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: QA / QC Specialist Engineer

Requisition number: 7881
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Ensures all Quality Control activities are performed in order to ensure that products are manufactured and delivered in compliance with Standards and with Client requirements

Job Description

• Responsible for ensuring product quality for the product line.
• Identifying problems and providing solutions.
• Receives direction from manager to set broad objectives.
• Consistently and clearly demonstrates creativity and innovation in finding solutions to multi‐faceted or time sensitive problems.
• Over 80% of product is outsourced, so position is critical to establishing and maintaining successful of source surveillance programs with global reach as well as supplier improvement.

Requirements
You are meant for this job if:

• Bachelor’s Degree preferred.
• 10 years’ experience in Quality Assurance field with experienced in supplier or procurement quality or engineering field.
• Master Black Belt, Black Belt, and/or six sigma certification preferred.
• ASQ Certification in Quality Engineering is preferred.
• Strong statistical data analysis and sampling plans skills.
• Material Review Board (MRB) experience.
• Root Cause and Corrective Action and FMEA experience is preferred.
• Knowledge of inspection tools, measurement and calibration system.
• Knowledge of ISO9001 (International Standard Organization) / API Q1 (American Petroleum Institute equivalent)
• Interpretation of Customer requirement.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Site Quality Engineer

Requisition number: 7963
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Supports the development, improvements and deployment of Quality Management systems and tools.
• Implements employees’ trainings.

Job Description

• Responsible for ensuring product quality for the product line.
• Identifying problems and providing solutions.
• Interfaces and coordinates with Product Engineering, Project/Product Management, and Customer for resolution of quality issues.
• Quality Team Member whose responsibilities include recommendations for supplier audits, training, status changes, additions, removals, corrective actions, review of supplier performance evaluations.
• Interface and coordinate with Engineering and Welding Engineering for Supplier Material and Welding Qualifications requirements.
• Perform root cause analysis and correction for repetitive supplier problems.
• Involve in handling Corrective Action Requests (CAR’s) and Non-Conformance Reports (NCR’s). Investigates problems with processes or system procedures, evaluates root cause, recommends corrective action and follows-up to ensure that action was effective.
• Performs and may lead internal and external audits of Quality Systems.
• Interface with functions on Quality related issues and training.
• Develops statistical sampling plans to inspect supplier parts at the receiving inspection.
• Receives direction from manager to set broad objectives.

Requirements
You are meant for this job if:

• Bachelor’s Degree preferred.
• 8-10 years’ experience in Quality Assurance field with experience in supplier or procurement quality or engineering field.
• Black Belt, and/or six sigma certification preferred.
• ASQ Certification in Quality Engineering is preferred.
• Strong statistical data analysis and sampling plans skills.
• Material Review Board (MRB) experience.
• Root Cause and Corrective Action and FMEA experience is preferred.
• Knowledge of inspection tools, measurement and calibration system.
• Knowledge of ISO 9001 (International Standard Organization) / API Q1 (American Petroleum Institute equivalent)
• Interpretation of Customer requirement.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Project Engineer – Systems

Requisition number: 7903
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.
• Works with clients to understand their needs.
• May perform computer modeling and analysis to support engineering projects.
• Uses commercially available FEA and/or CFD software.
• May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.
• Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution.
• Knowledgeable in use of relevant Engineering tools.
• Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.
• Creates, reviews/approves part reports, drawings, engineering specifications and standards. Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables.
• Generate and lead conceptual designs or customize existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts.
• Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.
• Selecting raw materials, coatings, and quality requirements as necessary.
• Support product lifecycle from tendering, system and product design through to  aftermarket support

Requirements
You are meant for this job if:

• Be a Nigerian citizen.
• Bachelor’s Degree in Engineering with at least 8 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the  Subsea Service Technician Apprentice Program or Engineering Boot Camp.
• Minimum 5 year’s experience in Subsea engineering. Capable of doing system engineering tasks.
• Capable of producing standard technical system documents.Capable of solving technical issues with coaching. Knowledgeable in how changes influences system engineering cost. Capable of leading teamwork.
• Capable of leading internal meetings.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Project Engineer – Lead Flow Control

Requisition number: 7873
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.
• Works with clients to understand their needs.
• May perform computer modeling and analysis to support engineering projects.
• Uses commercially available FEA and/or CFD software.
• May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.
• Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution.
• Knowledgeable in use of relevant Engineering tools.
• Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.
• Creates, reviews/approves part reports, drawings, engineering specifications and standards.
• Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables.
• Generate and lead conceptual designs or customise existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts.
• Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.
• Selecting raw materials, coatings, and quality requirements as necessary.
• Support product lifecycle from sales, tendering, system and product design through to service and aftermarket support

Requirements
You are meant for this job if:

• Be a Nigerian citizen.
• Have a minimum of Bachelor’s Degree in Engineering with at least 10 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the Subsea Service Technician Apprentice Program or Engineering Boot Camp.
• Minimum 5 year’s experience in Subsea engineering.
• Capable of doing system engineering tasks.
• Capable of producing standard technical system documents.
• Capable of solving technical issues with coaching.
• Knowledgeable in how changes influences system engineering cost.
• Capable of leading teamwork.
• Capable of leading internal meetings.
• Demonstrated ability to create installable, functional, and cost effective designs that meet specification/requirement from external clients.
• Ability to design complex engineering plans and review/approve design work for systems and products.
• Understanding of typical offshore construction design codes is required. (API 17D, ASME B31.8, API RP 2A, AISC)

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Project Engineer – Topside Control

Requisition number: 7231
Location: Nigeria
Place of work:  Office
Offshore/Onshore: Onshore

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.
• Works with clients to understand their needs.
• May perform computer modeling and analysis to support engineering projects.
• Uses commercially available FEA and/or CFD software.
• May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.
• Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution
• Knowledgeable in use of relevant Engineering tools.
• Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.
• Creates, reviews/approves part reports, drawings, engineering specifications and standards.
• Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables.
• Generate and lead conceptual designs or customize existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts.
• Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.
• Selecting raw materials, coatings, and quality requirements as necessary.
• Support product lifecycle from tendering,  system and product design through to  aftermarket support

Requirements
You are meant for this job if:

• Be a Nigerian citizen.
• Bachelor’s Degree in Engineering with at least 8 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the  Subsea Service Technician Apprentice Program or Engineering Boot Camp.
• Minimum 5 year’s experience in Subsea engineering. Capable of doing system engineering tasks.
• Capable of producing standard technical system documents.Capable of solving technical issues with coaching. Knowledgeable in how changes influences system engineering cost. Capable of leading teamwork.
• Capable of leading internal meetings.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online