Vacancies at CWG (Co-Workers Group) Engineering Limited

Vacancies at CWG (Co-Workers Group) Engineering Limited

CWG (Co-Workers Group) Engineering Limited is a wholly employee-owned engineering consulting practice, specialising in providing 3D Laser Scanning, Engineering & Design Services, Manpower Supply and Project Management throughout Nigeria. At CWG Engineering Limited, we provide innovative, practical, economical, and environmentally sustainable solutions and most importantly achieve our client’s objectives. Our values of people, respect, performance and transparency underpin our culture. Our staff are our greatest asset and the future of our success. We empower our people to grow by providing opportunities and challenges in a supportive environment.

We are recruiting to fill the position below:

Job Title: Cost Control Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Identify and report value engineering and cost reduction opportunities.
• This position will manage a staff of cost engineers.
• Supporting the development of estimates and budgets.
• Supporting the development of plans and schedules.
• Tracking performance against the budgets and schedules while correlating performance information against the work processes.
• Analysing variances of both direct hire and contract hire work activities.
• Identifying trends where deviations are about to occur unless action is taken
• Identifying potential scope changes.
• Providing input on project schedule.
• Tracking Labor charges and rates against budgets.

Requirement

• Bachelor’s / Master’s Degree in Engineering or related field.
• 5 – 10 years experience.
• Understanding project specifications and developing time schedules and budgets that meet them.
• Identify and report value engineering and cost reduction opportunities.
• This position will manage a staff of cost engineers supporting the development of estimates and budgets.
• Supporting the development of plans and schedules and Tracking performance against the budgets and schedules while correlating performance information against the work processes.
• Analysing variances of both direct hire and contract hire work activities and Identifying trends where deviations are about to occur unless action is taken.
• Identifying potential scope changes and Providing input on project schedule.
• Tracking Labor charges and rates against budgets.

Software:

• Project Management Professional PMP
• Plant Design Management System PDMS
• Primavera P6
• Advance excel (Power BI).

Salary
N500,000 – N800,000 monthly.

Application Closing Date
31st July, 2024.

How to Apply
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Telecoms Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Preparation of Telecommunication Engineering deliverables including Design Basis, Specifications for various Telecommunication Systems, System Block Diagrams, Datasheets,
• Perform Fiber Optic Link Budget Calculations, Data and Telephony Traffic Analysis, Capacity / Bandwidth Calculations, Public Address Sound Pressure Level Calculations.
• Provide engineering input to engineering drawings including Device Location Plans, Cable Routing Layouts, Instrument/Device Installation Details, Interconnection Diagrams, Wiring Diagrams, Circuit & Connection Diagrams, Cable Block Diagrams and MDF / IDF Schematics, FO Allocation Diagrams, Device and Equipment Schedules etc.

Requirements

• Bachelor’s / Master’s Degree in Mechanical Engineering or related field.
• Experience in and understanding ANSI/TIA/EIA, 568-A, 569-A, 570-A, and 606 standards.
• Knowledge of the ATEX, engineering practice standards.
• Proficient in the codes and standards within the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.
• Strong analytical and troubleshooting skills in the field of metering systems.
• Conversant with Shell DEP, TotalEnergies GS

Software:

• AutoCAD 2D & 3D
• Microsoft Office Suite
• Navisworks.

 Salary
N500,000 – N800,000 Monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Planning Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Understanding project specifications and developing time schedules and budgets that meet them.
• Negotiating with vendors and contractors to secure the best prices.
• Observing existing processes, analysing staff performance, and addressing deficiencies accordingly.
• Monitoring and tracking project progress and writing up reports.
• Attending and scheduling meetings as required.
• Delegating tasks and ensuring workers receive feedback.
• Understanding and meeting all contract requirements.
• Communicating with managers, supervisors, and the rest of the team.
• Analysing technical drawings and providing material and cost estimates.
• Ensuring all projects are completed on time and within budgets.

Requirements

• Bachelor’s / Master’s Degrees in Engineering or related field.
• 5 – 10 years relevant work experience.
• Understanding project specifications and developing time schedules and budgets that meet them.
• Negotiating with vendors and contractors to secure the best prices.
• Observing existing processes, analysing staff performance, and addressing deficiencies accordingly.
• Monitoring and tracking project progress and writing up reports and delegating tasks and ensuring workers receive feedback.
• Understanding and meeting all contract requirements and communicating with managers, supervisors, and the rest of the team.

Software:

• Project Management Professional PMP
• Plant Design Management System PDMS
• Primavera P6
• Advance excel (Power BI).

Salary
N500,000 – N800,000 Monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Civil / Structural Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Conducting site inspections and monitoring progress.
• Work within a multi-discipline team to develop and/or review efficient and reliable civil/structural design packages.
• Coordinate design activities to maintain project schedules, budget, quality requirements to ensure successful project completion.
• Accountable to provide design activities in accordance with applicable codes and standards, including company policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control.
• Prepare specifications for material, equipment, and construction work Deliver accurate and thorough civil/structural designs that will meet industry standards and specifications and meet prudent engineering practices Review internal and external designs for code compliance, good design practice and constructability.
• Coordinate design activities with other multi-discipline project team members Provide construction support including resolving site queries, attending site meetings, and performing site inspections during the construction phase of projects.

Requirements

• Bachelor’s / Master’s Degree in Civil Structural Engineering or related field.
• 5 – 10 years work experience.
• Strong knowledge of engineering software and technologies
• Excellent communication and project management skills.

Software:

• STAA DPRO Vi8
• TEKLA
• LPILE

Salary
N500,000 – N800,000 monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: QAQC Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Prepare and regularly (weekly) submit reports and maintain records
• Prepare project site related reports and presentations as required and produce performance measurement tools to monitor the Contractor’s and project performance
• Ensure that the approved Inspection and Test Plan (ITP) and Method Statements are implemented by the Contractor on site and the particular hold points required are coordinated with the Project Team
• Conduct Quality or technical compliance audits for Contractor, Subcontractor or Vendors Review QA/QC organization
• Review QA/QC Procedures as submitted by the Contractor’s and ensure implementation.
• Review Inspection, Test, Plans as submitted by the Contractor’s and ensure compliance with AGREEMENT requirements.
• Attend activities on site and ensure their compliance with QA/QC procedure in respect of the format signed off by the Contractor’s QA/QC Manager

Requirement

• Bachelor’s / Master’s Degree in Mechanical Engineering or related field
• Certified and/or registered quality assurance auditor/assessor or other equivalent registrations.
• Experience writing and implementing QA Management Systems for engineering programs.
• Develop and maintain the Quality Management System, Quality Management Plan in line with legislation, certification, contract requirements and parent company governance.

Software:

• Microsoft Office suite.

Salary
N500,000 – N800,000 / month.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Piping Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Ensures the achievement of assigned goals and the fulfillment of the project quality requirements and the contractual obligations.
• Analyze the project technical documents in order to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met.
• Monitors and reports actual progress including 3D / check for Discipline activities, including control of men-hours and delivered documents; particular care is required for sub-contracted activities.
• Writes the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines (the technical roadmap for the discipline engineering activities).
• Provides technical support to Procurement, Subcontracting and Construction activities included in the scope of work.

Requirements

• Bachelor’s / Master’s Degree in Mechanical Engineering or related field.
• 5+ years relevant work experience.
• Experience with piping system design and installation.
• Conversant with Shell DEP, TotalEnergies GS, international codes and standards such as ASME, ANSI, ASTM, NPF, etc
• Knowledge of stress analysis and pipe stress calculations.
• Excellent communication and project management skills.

Software:

• AutoCAD
• CAESAR II
• Autopipe
• Pipe Stress
• PDMS/E3D/Auto Plant 3D
• Navisworks Review
• Microsoft Office suite.

Salary
N500,000 – N800,000 Monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to:career@cwgeng.comusing the Job Title as the subject of the mail.

Job Title: Process Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Responsible for process engineering activities and deliverables for equipment package, and utility systems.
• Responsible for process design, simulation, heat & material/energy balance. Generate process engineering drawings such as Process Flow Diagrams, Utility Flow Diagrams, Piping & Instrumentation Diagrams and Isolation Drawings.
• Prepare process deliverables such as equipment list, line list, process datasheets, process description, basis of design, control narratives and technical specifications for vendor/supplier packages.
• Perform hydraulic calculations and calculations for process equipment such as separators, desalters, sour water strippers, knock-out drums, air receivers, storage tanks, etc.
• Sizing the heat exchangers (HTRI), control valves and relief devices by evaluating different scenarios.
• Prepare Potential Change Alerts, Design Change Notes, Technical Change Records and Decision logs for the deviations/process changes that were made in the process scheme from the statement of requirements.

Requirements

• Bachelor’s / Master’s Degree in Chemical Engineering or related field.
• Experience with process simulations and standard operating procedures.
• High-level knowledge of process engineering software systems.
• Experience with HAZOP, HAZID and SIL rating studies preferred
• Proven experience in the Engineering Procurement and Construction (EPC) industry in designing facilities for Oil and Gas Processing and transportation (pipelines).

Software:

• Aspen Hysys
• Flaresim Olga
• Pipesim
• Autocad
• Microsoft Office Suite.

Salary
N500,000 – N800,000 / month.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Materials, Corrosion & Inspection Personnel

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Provides subject matter technical assistance to field operations and maintenance personnel in matters regarding cathodic protection, protective coatings, material selection, corrosion inhibitors & biocides, corrosion data management, construction techniques, and testing procedures for the prevention and control of corrosion will provide consultation on specialized area related to corrosion control and Cathodic Protection and provide consultation and guidance to the other Corrosion Engineers and the gas organization as required in this area of expertise
• Establish test procedures and requirements in order to validate corrosion mitigation solutions when necessary.
• Evaluating corrosion mechanisms while testing, designing, evaluating, installing, documenting, and maintaining corrosion control systems and providing required record keeping
• Utilizing the established Corrosion Coupon database to record, monitor and evaluate internal corrosion data for ensuring 100% compliance.
• Manages the development, implementation and maintenance of internal corrosion testing procedures.

Requirements

• Bachelor’s/Master’s Degree in Civil/ Chemical/ Mechanical Structural Engineering or related field.
• Integrity management in oil and gas projects.
• Inspection of traditional techniques (UT/radiography / visual) and advanced techniques

Software:

• Microsoft Office suite.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Mechanical Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Preparation of project deliverables as per cost, schedule and quality requirements
• Act as Senior Mechanical engineer to manage delegated aspects of a project team
• Ensure that the technical competence of mechanical staff supervised is matched to the work in hand
• Maintain technical integrity within the team
• Fully conversant with international design codes for Process and Utility Packaged equipment such as Gas Dehydration, Gas Sweetening, Produced Water Treatment, Flare, Reverse Osmosis, Air Compressor, Air Dryer, Nitrogen Generation etc.
• Fully conversant with packaged equipment operation and maintenance issues and requirements
• Prepare equipment specifications and datasheets of packaged equipment
• Prepare procurement engineering documents, such as tender documents/RFQs, technical bid evaluations, purchase recommendations

Requirements

• Bachelor’s / Master’s Degree in Mechanical engineering or related field.
• Ability to write clear and comprehensive technical documentation.
• Highly analytical mind, with exceptional problem-solving skills and attention to detail.
• Proficient in the codes and standards within the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.

Software:

• PV ELITE
• AutoCAD 2D & 3D
• Microsoft Office suite
• PDMS/E3D
• AutoPipe Vessel

Salary
N500,000 – N800,000 monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Instrumentation Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Instrumentation setup in instrumentation lab
• Provide technical guidance, support, training, and expertise to plant.
• Monitor Instrumentation system performance across all plant units.
• Assess Instrumentation performance and recommend improvements for system optimization.
• Develop and maintain lifecycle management activities for instrumentation systems.
• Establish auditing guidelines and perform instrument audits.
• Lead the development of new strategies and validate the feasibility of improving company productivity.
• Provide awareness sessions and lead technical exchanges and conferences.
• Act as a subject matter expert in Instrumentation and contribute to the troubleshooting activities.

Requirements

• Bachelor’s / Master’s Electrical Engineering, Electronics Engineering, Instrumentation and control engineering or equivalent
• Experience in refining /oil and gas plants /petrochemical industries.
• Proficient in the codes and standards within the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.
• Strong analytical and troubleshooting skills in the field of metering systems.
• Conversant with Shell DEP, TotalEnergies GS
• Familiarity with field instrument types and applications.
• Working knowledge of oil/gas-related plant processes.

Software:

• INTOOLS
• Microsoft Office Suite – Word, Excel, PowerPoint etc
• AutoCAD 2D and 3D
• 3D model – PDMS/E3D/Auto Plant 3D
• NavisWorks.

Salary
N500,000 – N800,000 / month.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to:career@cwgeng.comusing the Job Title as the subject of the mail.

Job Title: Electrical Engineer

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Implement project/client requirements into electrical design.
• Prepare electrical load list, schematic diagrams, single line diagrams, cable schedules and MTO using Smart Plant Electrical.
• Perform calculations for equipment sizing, UPS, cable sizing, lighting, grounding and heat tracing.
• Design and checking of single lines, schematics and wiring diagrams, area classification, grounding, panel/cable schedules, equipment layout, cable layout, tray layout, lighting and installation details without supervision.
• Review and coordinate electrical 3D model with the other disciplines.
• Provide construction support and perform pre-commissioning and start-up activities for electrical systems when required.

Requirements

• Bachelor’s / Master’s Degrees Electrical Engineering, Electronics Engineering,
• 5+ years relevant work experience.
• Experience in refining /oil and gas plants /petrochemical industries.
• Proficient in the codes and standards within the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.
• Strong analytical and troubleshooting skills in the field of metering systems.
• Conversant with Shell DEP, TotalEnergies GS.

Software:

• ETAP
• LUMIX
• DIALUX
• SKM POWERTOOLS
• CHALMLITE.

Salary
N500,000 – N800,000 Monthly.

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to: career@cwgeng.com using the Job Title as the subject of the mail.

Job Title: Health and Safety Executive (HSE)

Location: Port Harcourt, Rivers
Employment Type: Contract

Job Description

• Collaborate with cross-functional teams to develop and implement risk assessment and management strategies for new projects, processes, and activities.
• Provide technical expertise and guidance on HSE matters to management, employees, and stakeholders, and serve as a resource for HSE-related inquiries and concerns.
• Maintain records and documentation of HSE activities, inspections, training, incidents, and corrective actions, ensuring accuracy, completeness, and confidentiality.
• Conduct risk assessments and safety audits of subcontractors, suppliers, and vendors to ensure compliance with HSE requirements and expectations.
• Liaise with regulatory agencies, industry groups, and external stakeholders on HSE matters, and represent the company in HSE-related meetings, forums, and conferences.
• Promote a culture of safety, environmental stewardship, and continuous improvement throughout the organization, fostering awareness, engagement, and accountability among employees and stakeholders.

Requirements

• Bachelor’s/master’s degree in any Engineering related field
• Inspection & Audits, Incident / Accident Investigation and Reporting.
• Safety System & Practices of Hazards Survey and Tracking Systems Data.
• EMS ISO 45001, Occupational Health, and Safety Management System.
• Intermediary Liaison and Client Relationship Management.
• Decision Making, Team Building, Recommendations & Advisory.

Software:

• Microsoft Package

Salary

• N500,000 – N800,000 monthly

Application Closing Date
31st July, 2024.

Method of Application
Interested and qualified candidates should send their CV to:career@cwgeng.comusing the Job Title as the subject of the mail.