Recruitment at Timospiden Global Services

Timospiden Global Services, a consultancy firm specialised in human capital development, is recruiting to fill the position below:

Job Title: Electrical Engineer

Location: Akwa Ibom

Job Description

• Supervised installation of substation equipment like distribution transformer, neutral ground resistor, medium and low voltage switchgear, AC & DC UPS, and batteries.
• Supervised earthing and lightning system installation.
• Supervised cable tray installation, cable pulling, testing, glanding and termination activities. Supervise testing and pre-commissioning activities on medium and low voltage switchgear such as testing of VT, CT, protection relays, VCB, ACB, transducers, OLR, ELR, busbar and line stability tests, ATS functionality tests, Hi-pot, IR, CRM tests.
• Supervise testing and pre-commissioning activities on Transformers such as ratio tests, winding resistance/IR tests, magnetising current tests, magnetic balance tests, vector group tests, and oil breakdown tests.
• Participate in SAT activities with OEM representative on AC/DC UPS systems such as battery charge/discharge tests, manual transfer of load from UPS to bypass and return, simulation of alarm conditions, inverter failure, and battery failure.
• Supervise Electric Motor tests such as winding resistance/IR tests, polarization index tests, motor solo run and mechanical run tests, and troubleshooting of the motor feeder in the case of a trip.
• Verify and review pre-commissioning test results to make sure they are in conformance with the project specifications.

Application Closing Date
30th April, 2025.

How to Apply
Interested and qualified candidates should send their CV to: aseyibabs@yahoo.com using the Job Title as the subject of the mail.

Job Title: Mechanical HVAC Engineer

Location: Akwa Ibom (100% site-based)
Employment Type: Contract
Department: Mechanical / MEP
Reports To: Sr. Mechanical HVAC Engineer – LEAD Engineer – Construction Manager – Project Head

Job Purpose

• To oversee and execute all on-site HVAC installation, commissioning, and quality control activities for power plant and substation projects, ensuring compliance with technical specifications, safety standards, and project timelines.

Key Responsibilities
Project Execution & Supervision:
Lead installation of:

• Air-cooled & water-cooled chiller systems with AHUs
• DX systems (AHU, VRF, split, cassette, ductable, package units etc)
• HVAC ducting networks and refrigerant & piping systems

Supervise testing procedures:

• Refrigerant leak testing
• Pressure testing (hydronic & refrigerant systems)
• Air and water balancing

Manage material logistics:

• Coordinate timely delivery of HVAC equipment/materials
• Maintain proper storage and handling procedures.

Maintenance Operations (O&M Phase):
Preventive Maintenance:

• Implement scheduled maintenance plans for:
  • Chillers (condenser/evaporator cleaning)
  • AHUs (filter changes, belt adjustments)
  • Cooling towers (water treatment)
  • Maintain lubrication schedules for rotating equipment.

Corrective Maintenance:

• Troubleshoot system failures:
  • Refrigerant leaks
  • Compressor faults
  • Control system malfunctions
  • Emergency breakdown response.
• Performance Optimization:
  • Energy efficiency monitoring
  • VFD tuning for pumps/fans
  • Refrigerant charge optimization.

Team & Resource Management:

• Organize work crews:
  • Assign supervisors, fitters, and assistants
  • Verify all personnel have proper safety certifications.
• Tool and equipment management:
  • Ensure availability of all required tools (power/hand tools, lifts, scaffolding)
  • Maintain calibration records for testing equipment
  • Conduct daily toolbox talks and safety briefings.

Quality Control & Documentation:
Implement quality assurance processes:

• Conduct inspections per ITP (Inspection & Test Plan)
• Prepare RFI’s with supporting documentation (IFC drawings, method statements).

Maintain records:

• Daily progress reports
• Non-conformance reports
• Test certificates.

Coordinate with QC team for:

• Material inspections
• Weld inspections
• Final system testing.

Planning & Coordination
Develop 3-week and 1-month look-ahead plans for:

• Manpower requirements
• Material procurement
• Equipment mobilization.

Attend coordination meetings with:

• Civil/structural teams for builder’s work
• Electrical teams for power/control wiring
• Client/consultant representatives
• Resolve technical clashes using MEP coordination drawings.

Technical Competencies
Proficient in interpreting:

• HVAC shop drawings
• P&ID diagrams
• Electrical control schematics.

Working knowledge of:

• SMACNA duct construction standards
• ASHRAE refrigerant piping practices
• NFPA safety codes
• Experience with:
  • Chiller plant commissioning,
  • BMS interface testing
  • TAB (Test, Adjust, Balance) procedures.

Qualifications

• Education: B.Tech / B.E in Mechanical Engineering
• Experience: 10 – 15 years in Power Plant & Substation HVAC Systems.

Required Skills & Attributes
Project Management:

• Cost control and budget monitoring
• Schedule adherence
• Risk assessment/mitigation.

Communication:

• Daily reporting to management
• Client/vendor correspondence
• Technical instruction to work crews.

Behavioral:

• Proactive problem-solving
• Decision-making under pressure
• Leadership in safety culture.

Application Closing Date
30th April, 2025.

How to Apply
Interested and qualified candidates should send their CV to: aseyibabs@yahoo.com using the Job Title as the subject of the mail.

Job Title: Civil Supervisor – T & D

Location: Akwa Ibom

Job Summary

• The Civil Supervisor is responsible for overseeing and coordinating all civil construction activities in oil and gas projects on site to ensure that all work complies with project specifications, safety standards, and quality requirements.
• This role involves managing teams, liaising with contractors and stakeholders, and ensuring timely delivery of project milestones.

Key Responsibilities

• Supervise and oversee civil works on-site, including foundations, structural installations, roads, drainage systems, and other infrastructure.
• Review project drawings, specifications, and schedules to ensure alignment with project goals and industry standards.
• Monitor daily construction activities and ensure compliance with safety policies, environmental regulations, and quality control procedures.
• Coordinate with contractors, vendors, and project teams to resolve technical issues and maintain progress.
• Inspect construction work and materials to ensure adherence to engineering designs and quality standards.
• Prepare and maintain progress reports, site logs, and documentation.
• Conduct toolbox talks and enforce safety protocols to foster a safe working environment.
• Manage resources, including labor, equipment, and materials, to achieve project efficiency and minimize wastage.
• Identify and mitigate potential risks to project timelines or budgets.
• Communicate effectively with project management teams and other stakeholders to ensure smooth execution of the project.

Requirements

• Bachelor’s Degree or diploma in Civil Engineering, Construction Management, or a related field.
• Minimum of 10 years and above relevant experience in civil construction, ideally in the oil and gas sector.
• Strong knowledge of civil engineering principles, construction processes, and relevant codes and standards.
• Proficiency in reading and interpreting engineering drawings and technical specifications.
• Excellent leadership, communication, and organizational skills.
• Ability to handle multiple priorities and work under pressure.
• Familiarity with construction safety and environmental policies.
• Proficiency in construction software and tools (e.g., AutoCAD, Primavera).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should send their CV to: aseyibabs@yahoo.com using the Job Title as the subject of the mail.

Job Title: Mechanical HVAC Engineer

Location: Akwa Ibom (100% site-based)
Employment Type: Contract
Department: Mechanical / MEP
Reports To: Sr. Mechanical HVAC Engineer – LEAD Engineer – Construction Manager – Project Head

Job Purpose

• To oversee and execute all on-site HVAC installation, commissioning, and quality control activities for power plant and substation projects, ensuring compliance with technical specifications, safety standards, and project timelines.

Key Responsibilities
Project Execution & Supervision:
Lead installation of:

• Air-cooled & water-cooled chiller systems with AHUs
• DX systems (AHU, VRF, split, cassette, ductable, package units etc)
• HVAC ducting networks and refrigerant & piping systems

Supervise testing procedures:

• Refrigerant leak testing
• Pressure testing (hydronic & refrigerant systems)
• Air and water balancing

Manage material logistics:

• Coordinate timely delivery of HVAC equipment/materials
• Maintain proper storage and handling procedures.

Maintenance Operations (O&M Phase):
Preventive Maintenance:

• Implement scheduled maintenance plans for:
  • Chillers (condenser/evaporator cleaning)
  • AHUs (filter changes, belt adjustments)
  • Cooling towers (water treatment)
  • Maintain lubrication schedules for rotating equipment.

Corrective Maintenance:

• Troubleshoot system failures:
  • Refrigerant leaks
  • Compressor faults
  • Control system malfunctions
  • Emergency breakdown response.
• Performance Optimization:
  • Energy efficiency monitoring
  • VFD tuning for pumps/fans
  • Refrigerant charge optimization.

Team & Resource Management:

• Organize work crews:
  • Assign supervisors, fitters, and assistants
  • Verify all personnel have proper safety certifications.
• Tool and equipment management:
  • Ensure availability of all required tools (power/hand tools, lifts, scaffolding)
  • Maintain calibration records for testing equipment
  • Conduct daily toolbox talks and safety briefings.

Quality Control & Documentation:
Implement quality assurance processes:

• Conduct inspections per ITP (Inspection & Test Plan)
• Prepare RFI’s with supporting documentation (IFC drawings, method statements).

Maintain records:

• Daily progress reports
• Non-conformance reports
• Test certificates.

Coordinate with QC team for:

• Material inspections
• Weld inspections
• Final system testing.

Planning & Coordination
Develop 3-week and 1-month look-ahead plans for:

• Manpower requirements
• Material procurement
• Equipment mobilization.

Attend coordination meetings with:

• Civil/structural teams for builder’s work
• Electrical teams for power/control wiring
• Client/consultant representatives
• Resolve technical clashes using MEP coordination drawings.

Technical Competencies
Proficient in interpreting:

• HVAC shop drawings
• P&ID diagrams
• Electrical control schematics.

Working knowledge of:

• SMACNA duct construction standards
• ASHRAE refrigerant piping practices
• NFPA safety codes
• Experience with:
  • Chiller plant commissioning,
  • BMS interface testing
  • TAB (Test, Adjust, Balance) procedures.

Qualifications

• Education: B.Tech / B.E in Mechanical Engineering
• Experience: 10 – 15 years in Power Plant & Substation HVAC Systems.

Required Skills & Attributes
Project Management:

• Cost control and budget monitoring
• Schedule adherence
• Risk assessment/mitigation.

Communication:

• Daily reporting to management
• Client/vendor correspondence
• Technical instruction to work crews.

Behavioral:

• Proactive problem-solving
• Decision-making under pressure
• Leadership in safety culture.

Application Closing Date
30th April, 2025.

How to Apply
Interested and qualified candidates should send their CV to: aseyibabs@yahoo.com using the Job Title as the subject of the mail.

Job Title: Mechanical Engineer

Location: Akwa Ibom

Job responsibilities

• Supervision Of all project vendors on site (Mechanical, Electrical, Civil Projects).
• Assist the Project Engineer/Project Manager in the review of plans, specifications, and designs submitted by contractors, architects, or engineers.
• Use of AutoCAD, PDMS and plant 3D software’s for the design drawings.
• Inspect all materials going into the project and confirm that they meet the acceptance criteria.
• Responsible for the inspection of the workmanship and practices (safety) of contractors and workmen engaged in project.
• Assist in interpreting provisions of contracts, plans, specifications, and designs.
• Ensure that all work is accomplished and that the materials utilized conform with the appropriate specifications.
• Utilized AUTOCAD in drawing P&ID, PFD, plans, elevations and isometric projection of pipelines, while consulting pipefitting manuals such as trouvay cauvin piping equipment handbook.
• Supervise sand blasting, coating of underground and surface pipes and fittings.
• Responsible for the supervision of hydro-test of valves and product line.
• Reported daily activity on the project sites to the project manager to ensure follow-up on regular basis.

Requirement

• Candidates should possess a Bachelor’s Degree

Application Closing Date
30th April, 2025.

How to Apply
Interested and qualified candidates should send their CV to: aseyibabs@yahoo.com using the Job Title as the subject of the email.