Recruitment at Nautilus Nigeria Engineering and Construction Limited

Nautilus Nigeria Engineering and Construction Limited (NNEC)’s mission is to provide all clients with high quality, cost-effective, on-schedule engineering, project management, inspection and environmental services. NNEC is committed to design and build more efficient, safer, reliable, and environmentally friendly facilities for the betterment of our clients and their communities.

We are recruiting to fill the position below:

Job Title: Maintenance Planner / Scheduler III

Locations: Akwa Ibom, Rivers & Lagos
Job type: Full-time

Summary

• Develops detail job plans for mechanical resources according to turnaround schedules and work lists.
• Develops field execution work planning packages for mechanical resources engaged in repairs and construction of fixed equipment, electrical, instrumentation, rotating equipment, analyzers, and other related equipment.

Tasks and Responsibilities
In addition to all Level I and II tasks and responsibilities, Level III:

• Perform work activities efficiently while continuously looking for cost-saving opportunities
• Develops detailed job plans that include the following steps, durations, material, and equipment needs and cost estimates:
  • Resource requirements
  • Safety Plans
  • Efficient job tasking to guide field crews
  • Repair procedures
  • Associated drawings and specifications
  • Sequence of scheduling
  • Material & equipment needs
  • Gantt chart for complete job
  • Total hours
• Cost estimate
• Become knowledgeable of ExxonMobil’s Turnaround Procedures
• Coordinate planning resources in accordance with turnaround specifications, cost estimates, schedules, safety requirement, quality requirements, various procedures, standards, practices, etc.
• Work with the Scheduler and execution to provide general coordination and monitor the progress of turnaround activities per the job plans and worklists
• Coordinate multi-craft job plans with other craft specific planners
• Update plans with any approved change orders and develops new plans that arise during the turnaround as requested by ExxonMobil
• Communicate daily with execution supervision during various phases of the turnaround to understand effectiveness of plan Analyze and recommend resolutions of work problems and execution in solving work problems
• Adjust plans with feedback from execution
• Walk down Job Packages and verify with prints and drawings
• Perform pre-start up safety review
• Create punchlists from pre-start up safety reviews
• Confirm with execution the progress of key turnaround milestones
• Develop detailed milestone plans and submits to scheduler
• Manage detailed line item work list
• Include job plans for resources to support operations shutdown and start up plans
• Perform critical and near critical path analysis
• Work directly with scheduler to finalize and optimize integrated event or turnaround schedule
• Validate work steps and durations with team members and contractors
• Participate in Integrated Event and turnaround reviews (IR/TR’s) and reports per Turnaround Milestone Schedule
• Prepare review documentation
• Participate in planning and scheduling Peer Assists
• Verify the following are completed:
  • Contractor execution of plan (work packages)
  • Bid Award contracts
  • Contractor selection and evaluation
  •  Long lead and short term materials are ordered
  • Open work orders for disciplines as required by plans
  • Maintain a logistics and security plan
  • Develop a site mobilization / preparation plan and demobilization plan, including remove surplus materials and temporary trailers
  • Conduct post turnaround walk through
  • Incorporate of best practices and MEV technologies
• Verify effective communications are maintained during various phases of turnaround including:
• Scope changes
• Field change orders
• Budgets
• Critical Path
• Utilization of contractors
• Progressing and look-ahead schedules
• Steward schedules and updates throughout the process
• Prepare package tasking details to guide field crews to perform safe and efficient field repairs.

Skills and Qualifications

• Previous experience in a closely related position
• Safety Champion – portrays a personal example of excellent safety, performance, mindset, and commitment
• Extensive knowledge of various mechanical skills (pipe fitting, welding, boiler making, electrical, rotating equipment, instrumentation, X-ray techniques and interpretation)
• Proficient in reading mechanical drawings, blueprints, isometrics, P&IDs
• Ability to understand field changes and red-line drawings
• Ability to coordinate various mechanical resources according to schedule and plan
• Good teamwork, interpersonal skills, and ability to work with multiple workgroups
• Ability to communicate quickly and effectively
• Intermediate skills in MS Word, Excel, and Outlook
• Familiar with MOC process and PSSR (pre-startup safety reviews) process
• Basic safety training and/or site-specific training
• Demonstrate the belief that accidents are preventable by including safety in assigned work activities
• Create and share personal safety plan with work group and ExxonMobil
• Facilitate and participate in safety meetings
• Demonstrate understanding of and verify compliance with safety standards, work practices, work permit requirements, and various safety systems
• Trained to safely access field areas to observe work being performed
• Trained/fit-tested on usage of SCBA (self-contained breathing apparatus) equipment and various respirators as needed
• Trained in use of standard PPE (hard hat, gloves, eye, and hearing protection)
• Trained to access scaffolds and ladders using fall protection PPE as needed
• Trained in ExxonMobil’s permitting system and qualified to receive job permits for themselves
• While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
• The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl.
• The employee is occasionally required to sit.
• The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Position as the subject of the email.

Job Title: Fluids Advisor III

Locations: Akwa Ibom, Lagos and Rivers
Job type: Full-time

Main Functions

• Provide technical and operations support for drilling and completion fluids selection, design, and management for drilling and completion operations.
• Provide technical and operations support for solids control and waste management for drilling and completions operations.
• Serves as a technical resource to perform audits of vendor processes and facilities.

Tasks and Responsibilities
In addition to Level 1 and 2 tasks and responsibilities, Level 3:

• Oversee accurate and save additions of material to the fluid system
• Ensure material is properly marked and material data sheets for each product are maintained and readily available
• Ensure all fluid solids control equipment is working properly and set for optimal conditions for the operations in progress
• Forecast future fluid materials needs and equipment spare needs to ensure adequate inventory exists and provide lists of additional quantities if needed
• Ensure inventory management for materials, equipment spares and tank utilization are provided daily to the Company’s location supervisor representative
• Ensure available storage space is effectively used to meet the requirements for the well and to optimize fluid inventory / costs
• Ensure daily that a thorough and accurate fluid report and recommended actions are provided to the Company’s location supervisor representative

Cementing Tasks:

• Work with Drilling Engineers in planning for future drill wells (writing cementing programs) and performing surveillance on active operations
• Steward overall performance of the cementing vendor
• Trouble shoot cementing operation. Track and close out non-conformance reports.
• Steward lab testing of cement slurries.

Requirements

• B.Sc Degree in Engineering or related technical field is preferred
• Experience in fluids, solids control and waste management
• Experience in international assignments
• Experience in deep water drilling operations (1000m) if filling a deep water drilling engineering position
• Experience in water based and non-aqueous drilling fluids; experience with various completion fluids
• Experience with solids control equipment and waste management
• Able to effectively organize and communicate thoughts
• Proficient computer skills and experience with Microsoft applications
• Read, write and speak fluent English.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Job Title as the subject of the email.

Job Title: Inventory Control Analyst III

Locations: Lagos and Rivers
Job type: Full-time

Main Functions

• Schedules and revises shipment plans to ensure efficient distribution of products to satisfy customers.
• Analyzes inventory levels, production speed and product demand to determine reorder levels which will ensure product availability and minimize inventory costs.
• Familiar with standard concepts, practices, and procedures within a particular field. Duties may include writing inventory reports, performing cycle counts, and determining periodic asset valuations.
• Works with minimal work direction and is highly skilled and knowledgeable to the position.

Skills and Qualifications

• MS Excel, ERP experience, organized
• Inventory Control Analyst on Expert level has extensive experience in the field and can potentially supervise others or give trainings.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Job Title as the subject of the email.

Job Title: Field Operator III

Location: Akwa Ibom
Job type: Full-time

Main Functions

• Operate equipment and wells by applying operating and safety procedures and guidelines  to meet daily operational plan, reduce equipment failure and efficient resources  administration

Task Responsibilities

• Responsible to implement on daily work objectives, housekeeping, safety, health,  environmental and security
• Active participation on daily toolbox meetings and regular, reported safety meetings
• Identify and implement corrective and optimization actions by the continuous
• surveillance of wells and equipment to ensure reliable, efficient and safe operational  conditions
• Function as Equipment Care Technician, and routinely use Maintenance skills in  performing simple maintenance activities
• Report when the alarm, emergency or emergency shutdown system is out of service
• Provide detailed, clear and accurate information when changing shift, to guarantee that unit conditions are updated and ensure operations continuity
• Coordinate, control and monitor maintenance jobs according with the corrective, predictive and preventive planning
• Report continuously in the log book all relevant operational events and abnormal
• situations or deviation occurred in the work area, equipment or personnel
• Take samples of products for laboratory analysis and execute field laboratory tests
• Active participation on emergency response activities
• Report incidents internally and escalate awareness as per the Incident Reporting

Guidelines:

• Ensure that Operations Shift Supervisor is informed and consulted about operations  activities
• Ensure good communication across the work team so that issues / actions can be adequately addressed
• Provide the basic facts concerning well producing problems, current production rates,  and current condition of the well
• Ensure that the well problem diagnostics are thorough and complete before requesting

Well Work intervention operations:

• Ensure that the wellhead and well surface equipment are maintained and are in good
• working order prior to Wellwork operations taking over responsibility for the well for  intervention operations
• Provide assistance and support to the ongoing Wellwork operations as needed

Requirements

• Completed secondary education and worked previously as a Field Technician.
• Strong communications (oral & written)
• High standard of Safety, Health, Environment aptitude and cultivates the same in others.
• Extensive knowledge and/or experience of pipeline operations
• Extensive knowledge of safety and operations management tools and processes
• Strong knowledge of Emergency Preparedness Procedures
• Extensive knowledge of Project Philosophy and Design Specifications
• Knowledgeable of relevant regulations
• Knowledgeable of relevant commercial agreements.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Position as the subject of the email.

Job Title: Machinery Lead III

Location: Lagos and Rivers
Job type: Full-time

Main Functions

• Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
• Facilitates effective execution of discipline engineering and design routines that align with the team’s goals, objectives, and procedures.
• Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues.
• In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Qualifications and Skills

• Master’s Degree in Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Demonstrates strong leadership skills that align with the company’s mission, vision, and values
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Position as the subject of the email.

Job Title: Machinery Engineer / Specialist III

Locations: Rivers & Lagos
Job type: Full-time

Main Functions

• Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
• Facilitates effective execution of discipline engineering and design routines that align with the team’s goals, objectives, and procedures.
• Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues. In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Tasks and Responsibilities
In addition to all Level 1 and 2 tasks, Level 3 will:

• Provide technical training to operations and mechanical
• Provide quality control and design reviews of new projects that involve rotating equipment
• Periodically review rotating equipment thermodynamic and mechanical performance
• Provide assistance in the field during plant start-ups, shutdowns or upsets

Skills and Qualifications

• Bachelor’s degree in Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communication

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Position as the subject of the email.

Job Title: Contracts Lead II

Locations: Akwa Ibom, Rivers & Lagos
Job type: Full-time

Summary

• Manages portfolio of agreements and new requests, enabling efficient and effective purchase of goods and services (from purchase to pay) with a focus on business value, on-time delivery, and cycle time
• Works with moderate work direction and is skilled and knowledgeable to the position.
• This position could be described as Senior Procurement Associate / Specialist / Contracts Manager who, on top of level 1 duties, might be managing contracts with high complexity or deep business knowledge.

Tasks and Responsibilities

• Negotiates contract pricing and terms & conditions directly with suppliers while working with internal stakeholders, seeking lowest total system costs and appropriate mitigation of supply and legal risk.
• Executes PtP (Procure-to-Pay) processes in full compliance with Sourcing & Acquisition Handbook and CIMS (Controls Integrity Management System) catalogs.
• Fully leverages Procurement processes and tools to ensure most effective procurement method is utilized.
• Maintains agreement portfolio: scope updates, pricing, Exhibits, amendments.
• Ensures contract compliance and utilization – monitors supplier performance, troubleshoots issues, etc.
• Ensures transactional efficiency of agreements by leveraging systems.
• Identifies business value and other opportunities within the portfolio.
• Develops and maintains internal and external relationships to meet business line expectations.
• Provides fit-for-risk process improvements.
• Influences development and implements Category strategic and commercial guidance; shares portfolio specific market intelligence to Category Networks.

Skills and Qualifications

• Behavioral Skills: analytical, applies learning, communicates effectively, creates business value & competes to win in marketplace, makes sound decisions.
• Functional Skills: PtP knowledge, system utilization & efficiency, total system cost, apply controls mindset, application of business & procurement technical knowledge, service excellence, contract development, contract management, negotiating and influencing, relationship management.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Position as the subject of the email.