Recruitment at WTS Energy

WTS Energy – Our client is a global integrated energy company that produces and markets energies.

They are recruiting to fill the position below:

Job Title: Electrical / Instrumentation Supervisor

Location: Port Harcourt, Rivers (Offshore & Onshore Locations)
Division: Engineering, Construction & Projects (ECP)

Job Summary

• Carry out studies/supervision related to Electrical and/or Instrumentation disciplines.
• Supervises construction contractors.

Responsibilities

• Carries out preliminary, basic and detailed facilities engineering studies / design in-house.
• Reads and interprets engineering drawings, specs and make necessary modifications or recommendations.
• Interfaces with Procurement Dept., Project & Construction Sections for engineering related issues.
• Draw up and cross-check relevant procedures, international standards and COMPANY General Specifications.
• Follows-up Purchase Orders to ensure timely approval, conformity of design & participates in technical reviews and Inspection of E&I materials.
• Follow-up on Engineering and Construction activities.
• Pre-mob inspection of E&I materials and equipment.
• Site supervision of E&I installation works.
• Ensure effective and timely response to technical queries in compliance with set standards, company specifications and safety procedures.

Health, Safety and Environment:

• Ensure and promote the application of the Company HSE rules and specifications.
• Ensure that contractors comply at all times with safety rules, taking actions as required in case of disregard of the rules, stopping the works if they are deemed unsafe, and organizing tool-box meetings and recovery plans.
• Promote safety culture within Company personnel and contractors as well as the reporting of anomalies
• Ensure and monitor the safety of personnel and installations as well as protection of the environment.
• Pursue within his team the HSE objectives defined by his line management

Qualifications / Experience Required

• Minimum Qualification: B.Sc. / B.Eng / HND in Electrical / Electronics Engineering with 5 – 7 years experience in an Engineering or facility Construction Organization.
• Use of Intools, Aveva Electrical & Instrumentation, Powertools, Ms Word, Ms Excel is required. Working knowledge of ISA codes, IEC standards and most common international standards. Knowledge of Autocad is an advantage.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Automation Sales Engineer

Location: Port Harcourt, Rivers (Remote)
Job Type: On-site

Job Summary

• A technically proficient and commercially driven Sales Engineer to lead our Automation and Control Systems business development efforts in Nigeria.
• The ideal candidate will have hands-on experience in solution selling of SCADA, PLCs, RTUs, Instrumentation, and Industrial Automation technologies to customers across the Oil & Gas, Power, and Industrial sectors.

Key Responsibilities

• Identify and pursue sales opportunities for automation and control systems (SCADA, PLC, DCS, Instrumentation, etc.) across the Oil & Gas, Power, and Industrial sectors in Nigeria.
• Develop a deep technical understanding of the company’s automation and control solutions to effectively present, demonstrate, and position offerings to technical and commercial stakeholders.
• Engage with engineering, procurement, and operations teams of clients to understand their automation needs and recommend suitable products and solutions.
• Conduct site visits, client meetings, and technical presentations to influence project specifications and secure orders from new and existing customers.
• Develop and manage a healthy sales pipeline through CRM tools and structured outreach, ensuring conversion of prospects into long-term clients.
• Provide pre-sales and limited post-sales technical support to ensure product fit, smooth delivery, and satisfaction of engineering expectations.
• Collaborate with internal teams including CRE, Legal, Fiannce and other PANA subsidiary teams, and OEM partners to tailor solutions per client requirements and generate offers for the same.
• Stay updated with market trends, competitor activity, and customer developments to provide market intelligence and suggest tactical actions.
• Actively   participate   in   industry   forums,   client   events,   technical exhibitions,   and government/association meetings to promote company offering and identify business opportunities.
• Build and maintain strong client relationships with consultants, EPCs, IOCs, and NOCs, with a special focus on developing and closing orders.
• Contribute to the preparation of sales campaigns, tender submissions, technical proposals, and pricing strategies in collaboration with the bid team and senior management.
• Monitor and report on risks, delivery challenges, or regulatory constraints affecting project execution or customer relationships, escalating to leadership when required.
• Coordinate with OEMs and local partners for joint promotional campaigns, trainings, and technical seminars to increase product awareness
• Ensure compliance with local content laws, registration requirements, and governmental approvals as applicable to project bids and supply.
• Undertake any additional responsibilities assigned by management in line with business needs and strategic direction.
• Travel as required both internally and externally to & fro Nigeria.

Academic Qualifications

• Bachelor`s Degree Engineering, or its equivalent in any discipline.
• 7 years of experience in sales of Automation products and solutions.
• Experience in O&G, Power sector
• Prior work experience showing increasing levels of responsibility with a focus on operations in a fast paced and entrepreneurial environment.

Technical Skills:

• Strong understanding of Automation & Control Systems: SCADA, PLC, DCS, RTUs, flow computers, HMIs, and related instrumentation.
• Knowledge of industrial communication protocols (e.g., Modbus, Profibus, OPC, Ethernet/IP).
• Familiarity with hazardous area classifications (ATEX/IECEx) and compliance requirements in Oil & Gas facilities.
• Ability to read and interpret P&IDs, loop diagrams, and control architecture drawings.
• Working knowledge of electrical panels, control cabinets, and field instrumentation (pressure, temperature, level, and flow sensors).
• Understanding of Digital Transformation solutions in the energy domain (e.g., Digital Twins, Predictive Maintenance, IIoT platforms).

Sales & Commercial Skills:

• Proven experience in solution selling to Oil & Gas operators, IOCs, NOCs, EPCs, and utility companies.
• Capability to identify, qualify, and close business opportunities within long B2B sales cycles.
• Strong negotiation and contract management skills.
• Experience using CRM tools (Monday.com, Sales force etc.) to manage pipelines and forecast sales.
• Understanding of local procurement processes, vendor registration, and public-sector bidding requirements (NIPEX, DPR, etc.).

Market Knowledge:

• Familiarity with the Nigerian Oil & Gas industry landscape, including regulatory bodies (e.g., NUPRC, NCDMB) and local content requirements.
• Knowledge of major operators like NNPC, Shell, TotalEnergies, Chevron, NLNG, and their procurement and technical evaluation standards.

Other Attributes:

• Team-oriented, but capable of operating independently.
• High level of initiative, ownership, and accountability.
• Willingness to travel within Nigeria and West Africa for customer visits, site surveys, and project follow-ups.
• Committed to compliance, ethics, and safety standards.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Civil Works Site Supervisor

Location: Port Harcourt, Rivers (Offshore & Onshore Locations)
Division: Engineering, Construction & Projects (ECP)

Job Summary

•  Ensure safe supervision of all civil works activities comprising of roads, drilling locations, concrete works, structural steel installation works for buildings etc.

Responsibilities

• Ensure that civil works are safely executed to the required project drawings and specifications.
• Ensure project QA/QC (quality assurance and quality control) measures are met.
• Ensure that materials for construction are of the required quality.
• Review and inspect concrete mix designs for concrete trial mixes.
• Assist in developing checklist for site works and laboratory testing activities.
• Review of contractor’s project deliverables e.g. ITP, Work Method Statement, QA/QC Plan, etc.
• Perform site and laboratory inspection/supervision for concrete cube preparation and workability test.
• Perform site and laboratory inspection/supervision for classification and strength test for road subgrade, sub-base and base material.
• Verify calibration status of third-party laboratory testing devices and equipment.
• Assist in developing concrete track register for all concrete compressive strength tests results.
• Report Non conformances (NCR) to job standard and specifications and ensure any observed NCR reports are promptly closed out.
• Compile punchlist items and ensure prompt close out before final hand over of facility to asset owner.
• Verify that necessary documentation are completed before site mobilization.
• Ensure that valid PTW is available and validated for the job daily.
• Verify contractor’s equipment mobilized to site are those premobbed before use on silo
• Prepare daily report of the project status with details of personnel, material and equipment on site.
• Review/updating of WBS in line with work progress.
• Analyze data/information generated on completed projects as a basis for improvement on future jobs.

Health, Safety and Environment:

• Ensure and promote the application of the Company HSE rules and specifications.
• Ensure that contractors comply at all times with safety rules, taking actions as required in case of disregard of the rules, stopping the works if they are deemed unsafe, and organizing tool-box meetings and recovery plans.
• Promote safety culture within Company personnel and contractors as well as the reporting of anomalies
• Ensure and monitor the safety of personnel and installations as well as protection of the environment.
• Pursue within his team the HSE objectives defined by his line management.

Qualifications / Experience Required

• Engineering background with a minimum of 5 years’ experience in construction of Oil & Gas installations.
• Good command of spoken and written English.
• Good interpersonal and communication skills.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Reliability Engineer

Location: Port Harcourt, Rivers

Role Summary

• The Reliability Engineer plays a critical role in ensuring the safe, reliable, and efficient operation of upstream oil and gas facilities.
• The role focuses on analyzing equipment performance, identifying potential failures, and implementing strategies to enhance asset integrity, availability, and lifecycle performance.
• The Reliability Engineer will apply reliability-centered maintenance principles, root cause failure analysis, and predictive maintenance techniques to optimize operational efficiency, reduce unplanned downtime, and drive continuous improvement in asset reliability.

Key Responsibilities
Asset Reliability & Maintenance Strategy:

• Develop and implement asset reliability strategies and maintenance programs to enhance equipment uptime, reduce failures, and optimize lifecycle performance.
• Apply reliability-centered maintenance (RCM), root cause analysis (RCA), and failure mode effects analysis (FMEA) techniques to improve asset performance.
• Define preventive and predictive maintenance plans tailored to critical upstream production and drilling equipment.

Performance Monitoring & Data Analysis:

• Monitor reliability KPIs, including Mean Time Between Failures (MTBF), Mean Time To Repair (MTTR), and equipment availability.
• Leverage data analytics and digital tools (CMMS, historian, and predictive monitoring systems) to track equipment performance and anticipate failures.
• Maintain a reliability database and recommend updates based on equipment history and performance data.

Risk Management & Integrity Assurance:

• Conduct risk assessments on production equipment and facilities to identify potential failures and impacts on production and safety.
• Support asset integrity programs, including corrosion monitoring, inspection schedules, and fitness-for-service evaluations.
• Collaborate with QA/QC and HSE teams to ensure compliance with international standards (API, ISO, ASME).

Project & Turnaround Support:

• Provide reliability input during project design, commissioning, and start-up to ensure maintainability and long-term integrity.
• Participate in shutdowns/turnarounds to ensure reliability activities are embedded in planning and execution.
• Support engineering modifications and upgrades with reliability analysis and recommendations.

Stakeholder Engagement & Reporting:

• Liaise with operations, drilling, maintenance, and engineering teams to align reliability initiatives with production goals.
• Prepare and present reliability reports, highlighting performance gaps, corrective actions, and continuous improvement plans.
• Mentor junior engineers and technicians in reliability methodologies and best practices.

Qualifications & Experience

• Bachelor’s Degree in Mechanical, Petroleum, Electrical, or related Engineering discipline.
• 7 – 10 years of experience in upstream oil and gas operations, preferably in reliability or maintenance engineering.
• Certification in Reliability Engineering (CRE), RCM, or Asset Integrity Management is an advantage.
• Strong knowledge of rotating equipment, static equipment, and subsea/production facilities.
• Experience in CMMS (SAP, Maximo) and reliability tools/software.

Key Skills:

• Strong analytical and problem-solving skills with ability to interpret large sets of performance data.
• Proficiency in reliability engineering tools (RCA, FMEA, Weibull analysis).
• Excellent knowledge of asset integrity, corrosion management, and maintenance strategies.
• Good communication and presentation skills for technical and management audiences.

Competencies:

• Technical Expertise: Deep understanding of upstream production systems and equipment reliability.
• Safety & Integrity Mindset: Ensures reliability initiatives enhance safety and environmental performance.
• Collaboration: Ability to work with multidisciplinary teams across operations, maintenance, and projects.
• Continuous Improvement: Proactive approach in identifying performance gaps and implementing sustainable solutions.
• Leadership: Capable of mentoring junior staff and influencing decision-making at leadership level.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online