Recruitment at Fortis Engineering Services

Fortis Engineering is a solutions-driven company serving Africa’s energy, oil and gas and mining industries with expertise in civil construction, asset integrity, maintenance, procurement, fabrication, installations, and O&M — delivered with precision, resilience, and safety.

We are recruiting to fill the position below:

Job Title: Construction Engineer, Onshore (Local)

Location: Nigeria
Organisation / Department: Bonga North (BN), Deepwater Projects SNEPCO/ EPC1
Reports to: Construction Lead

Brief Description

• To manage fabrication activities at project fabrication yard in Port Harcourt. Successful candidate shall serve as the Company Site Representative at the fabrication yard ensuring that the project’s HSSE, quality and schedule objectives are achieved.

Dimensions

• Deliver the onshore fabrication scope of the BN EPC1 project (circa 300 metric tons of piping and structural steel)
• Work in a multi-discipline project team providing all necessary support towards ensuring safe and quality scope delivery within schedule
• No direct reports.
• No CAPEX budgets.

Principal Accountabilities

• Adhere to and work in line with company guidelines on Health, Safety, Security, and Environment (HSSE) and Ethics & Compliance.
• Drive the implementation of acceptable codes, standards and best practices in the fabrication engineering, fabrication, testing, installation, integration and pre-commissioning, scopes at the fabrication yard.
• Ensure the final products delivered meets the applicable code requirements as well as the project scope of work and specifications.
• Responsible for managing the fabrication planning and sequencing and also supervision of the execution.
• Facilitate Constructability and construction readiness reviews and be responsible for design reviews to ensure constructability requirements are embedded in design and designs are safe.
• Responsible for reviewing and inspecting all drawings and designs prior to implementation.
• Expected to be subject matter experts on constructability requirements and complete routine tests to ensure all legal regulations are complied with.
• Ensure adherence to Shell HSSE standards and to deliver within budget i.e. cost control and accounting, schedule, and quality requirements.
• Preparation of deliverables in alignment with the Company requirements
• Ensure projects are performed in accordance with the terms and conditions in the relevant contract documents.
• Provision of construction inputs into SIMOPs, HAZOP, HAZID and other technical safety activities
• Provision of equipment assurance for compliance to standards/requirements.
• Responsible for preparation and review of construction work packages including mechanical, electrical, structural, and piping work packages.
• Initiation and implementation of changes using the Shell’s change management process.
• Review and implementation of Construction Site Safety Systems at onshore construction worksites.
• Development and implementation of resource plans and forecasts
• Co-ordinate and verify applicable worksite protocols not limited to; mobilization, and equipment checklist / certification.
• Review Material-Take-Off (MTO) documentations and identify critical equipment and lifts.
• Ensure that site works are performed in accordance with approved procedures.
• Interface with the Engineering team to clarify and resolve Site Technical Queries.
• Attend daily worksite meetings to address progress, planning, engineering and HSE issues.
• Create demonstrable value for customers by understanding their drivers and critical success factors.
• Deliver continuously improving performance, benchmarked as top tier in the industry.
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation, and reliability of designs.
• Contribute to excellent HSE performance throughout the engineering phase of the project life cycle.
• Keep track on the execution schedule and report any issues to stakeholders.
• Supervision of construction activities.
• Monitor contractor performance and ensure specifications / approved procedures and applicable MOC (if any) are implemented.
• Manage onshore fabrication activities at contractor’s yards, including load-out.
• Perform all other duties as assigned by supervisor.
• Review contractor deliverables to ensure compliance with project specifications, relevant codes and standards, and best industry practices within contractual review periods.
• Review of fabrication drawings for all items across the BN EPC1 for installation and construction activities, including providing support for development of work packages.
• Balance technical assurance and commercial considerations to deliver construction scope effectively.
• Contribute to the development and deployment of fit for purpose quality plan and Inspection and Test Plan (ITP), NDT including materials management procedure for the Project.

Requirements
The Construction Engineer shall have following qualifications and experiences:

• Bachelor’s Degree in Engineering and a Registered Professional Engineer
• 15 years of experience in design and construction of offshore oil and gas production facilities and experience in supporting FPSO in a project management role.
• Skilled in managing oil and gas fabrication activities in a midsize to large fabrication yard
• Good understanding of fabrication quality requirements. Quality certification is a plus.
• Must be able to read, understand and interpret engineering and fabrication drawings
• Must be knowledgeable in Engineering and Fabrication codes, standards, regulations, and practices applicable to the design and construction of offshore production facilities (API, ASME, ANSI, AGA, ISA, ASNT etc).
• Broad knowledge and experience of Project Management techniques, tools, and practices.
• Proven track record of having successfully delivered brownfield projects in the offshore/deep water environment.
• Strong HSE commitment and demonstrated HSE leadership skills.
• Solid background in all aspects of EP project execution especially in areas of fabrication, installation and pre-commissioning,
• Experienced in key customer and stakeholder management.
• Excellent leadership skills. strategic thinker and pragmatic Engineer
• High personal energy level and a proven track record in achieving stretched personal and business goals.
• The candidate must demonstrate strong organizational abilities, good human and public relations skill and strong operational safety awareness.
• Ability to work and manage in a diverse, multi-cultural environment.
• BOSIET/Approved Offshore Medical will be required for Offshore trips and work as may be required
• Medically Certified fit to work.
• Thorough knowledge of offshore engineering construction methods including its practice and procedures.
• Computer literate, with proficiency in the use of MS suites including rotating
• Must have knowledge/skill level in HSSE and applications within the Oil and gas Industry.
• Excellent Communication skill (written and oral)
• Team player with ability to collaborate effectively with internal and external stakeholders to ensure project alignment and successful delivery.
• Ability to work in a multi-cultural environment

Justification:

• The Construction Engr. is under resourced for the work volume especially as the project transitions into detailed engineering.
• To ensure the project’s successful and high-quality delivery, it is necessary to fill the positions provisioned in the Project organogram as soon as possible.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: Supply Chain Analyst, RTP

Location: Nigeria

About the Role

• We are seeking to employ Supply Chain Analyst, RTP. This position reports directly to the SC Operations RTP Team Lead.
• The role is accountable for supporting SAP activities related to the Bonga North Team, ensuring the adherence to the Requisition-to-Pay (RtP) process and compliance with all contractual requirements and procedures during the contract duration.
• The SC Analyst RTP will play a critical role in managing the end-to-end Requisition to Pay cycle, focused on Purchase Requisition (PR) to Service Entry (SE) issuance within the BN Team.
• This role will ensure that Materials and Services are requested, ordered, received, and timely paid for in compliance with the Trade Controls framework.

Responsibilities

• Drive the Request To Pay (RTP) process by collaborating closely with project teams and other stakeholders to ensure timely delivery of PRs (Services and Materials) and SE creation (services) for project execution.
• Demonstrate a proactive commitment to continuous improvement.

Key Challenges:

• Ensuring adherence to RtP processes, meeting tight deadlines, and effectively prioritizing tasks.
• Initiate and process Purchase & Material Requisitions (PRs/MRs) based on business needs.
• Adopt the correct contract line item when raising Materials or Service requisitions; release network activity in order to create PRs/MRs.
• Ensure accuracy and completeness of requisition details, including scope, quantity, and budget codes.
• Liaise with requestors to clarify requirements and ensure alignment with procurement strategies.
• Collaborate with the Project Managers, Contract Managers, Contract Holders, and Finance focal points for relevant supports, approvals and reviews.
• Monitor conversion of approved PRs/MRs into Purchase Orders (POs) using procurement systems developed on .NET (e.g., SEPRA, SAP etc.).
• Coordinate with requestors to confirm delivery or completion of Materials and Services.
• Ensure the Good Receipt and Good Issue of materials are performed in SAP.
• Ensure correct issuance of Good Receipt Note (GRN) to the vendor.
• Verify invoices, process SEs and ensure timely payment to vendors.
• Collaborate with Cost Engineer and Finance focal point to resolve payment issues and ensure compliance with financial controls
• Resolve discrepancies between POs, deliveries, and invoices.
• Raise relevant manual accruals at month-end and convert them to system accruals.

System and Documentation Management:

• Utilize tools developed on .NET such as SEPRA and MRA (also the replacement Tool) to manage procurement, material and service requests.
• Upload and maintain documentation for audit purposes.
• Track and report on RtP activities using dashboards and trackers.

Stakeholder Engagement:

• Liaise with Project Engineers, Contract Managers, Contract Holders, Cost Engineers, Planning Engineers and Finance focal points.
• Facilitate approvals and reviews required for procurement progression.
• Provide support and guidance to BN Team on RtP processes.

Performance Monitoring:

• Maintain weekly trackers for commercial processes (PR, PO, SE, etc.).
• Develop and maintain an up-to-date tracker of all commercial processes, including the status of MRA, PR, PO, deliverable completion, SE, and closeout for the teams, and present visual performance dashboards using the SEPRA Dashboard.
• Develop leading indicators to show Material & Services performance (planned vs. actual) and actions to remediate deviations.
• Display performance details in a simple visual format that is easy for project team to track.

Qualification and Experience Requirements
Qualification:

• Bachelor’s Degree in Supply Chain Management, Engineering, Business, or a related field

Experience:

• Must have 2 – 6 years in the oil & gas industry.
• Minimum 3 years in Projects with significant experience as an SAP professional, directly managing SAP scope for project execution.

Core Competencies:

• Skill level in Excel, capable of organizing data, creating eye-catching charts, and automating tasks to save time.
• Skill level understanding of SAP System principles, techniques, tools, and troubleshooting, with the ability to resolve end users RtP issues.
• Skill level in SAP PS and PM Modules is a must; proficiency in other SAP
• Modules is also considered.
• Knowledgeable in Data Analytics Tool such as Power BI and Python.

Skills:

• Excellent collaboration, analytical, communication and written skills.
• Demonstrate ability to present and communicate SAP analysis to stakeholders.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: Construction Engineer (E&I)

Location: Nigeria

Job Description

• To deliver construction engineering, involving planning, preparations and execution activities with E&I/C deliverables for assigned projects and ensure timely completion to the required quality standards considering safety and ethical compliance.

Dimensions:

• Deliver Construction Engineering scope for the BN EPC1 project.
• Work in a multi-discipline project team providing all necessary support towards ensuring quality work delivery on schedule.
• Work and guide contractor team in delivering the construction in EPC1 systems, equipment packages etc. in line with project specifications.
• Deliver fabrication/package manufacturing support and other onshore readiness activities for the BN EPC1 projectNo direct reports.
• No CAPEX budgets.

Responsibilities

• Adhere to and work in line with company guidelines on Health, Safety, Security, and Environment (HSSE) and Ethics & Compliance.
• Drive the implementation of E&I/C construction engineering and execution requirements in the design, fabrication, testing, installation, pre-commissioning, and commissioning of assigned project.
• Ensure the final products delivered meets the applicable code requirements as well as the project scope of work and specifications.
• Be responsible for delivery of assigned activities for the BN EPC1 Projects Portfolio from Detailed Design, Construction, Commissioning and Handover.
• Responsible for managing the planning, design, directing, coordinating and supervision of construction activities for electrical, instrumentation, control systems/piping interface deliverables.
• Facilitate Constructability and construction readiness reviews and be responsible for design reviews to ensure constructability requirements are embedded in design and designs are safe.
• Develop construction execution strategy, construction execution and workface execution plans.
• Responsible for reviewing and securing support for E&I/C. drawings and designs prior to implementation relevant for construction phase.
• Expected to be subject matter experts on constructability requirements and complete routine tests to ensure all legal regulations are complied with.
• Ensure adherence to Shell HSSE standards and to deliver within budget i.e. cost control and accounting, schedule, and quality requirements.
• Managing delivery via contractors and resources drawn from the matrix organisation.
• Develop the scope of assigned project and progress though the relevant decision gates.
• Preparation of construction execution packages to define and assure the scope, with execution requirements as appropriate for the project.
• Preparation of deliverables in alignment with the Company requirements.
• Must be capable of determining the organizational structure required to accomplish the assigned project functions efficiently and in accordance with approved plans and schedules.
• Responsible for ensuring assurance of construction schedules and management of cost related components towards project goals safely and efficiently as required.
• Stakeholder management and engagement with relevant parties associated with interfaces and integrations for project successImplementation of contract strategy to execute the assigned scope.
• Manage the relationships with various discipline engineers, contract packages and other stakeholders.
• Ensure projects are performed in accordance with the terms and conditions in the relevant contract documents.
• Provide adequate guidance and leadership to the design and planning personnel in the development of the project plan.
• Planning, managing, and integrating scopes & resources allocations in brownfield offshore environment.
• Provision of construction inputs into SIMOPS, HAZOP, HAZID and other technical safety activities.
• Provision of equipment assurance for compliance to standards/requirements.
• Managing PTW during offshore construction execution on Bonga FPSOResponsible for preparation, review and management of construction work packages for electrical, instrumentation, control systems and integration related work packages.
• Initiation and implementation of changes using the Shell’s change management process.
• Review and implementation of Construction Site Safety Systems at onshore and offshore construction worksites.
• Development and implementation of resource plans and forecasts Plan, sequence, and execute offshore construction and installation activities.Co-ordinate and verify applicable worksite protocols not limited to; mobilization, and equipment checklist/certification.
• Review Material-Take-Off (MTO) documentations and identify critical equipment and installation methodologyEnsure that site works are performed in accordance with approved procedures and standard practices.
• Interface with the Offshore project leadership, including OIM, operations and maintenance teams to ensure seamless and safe project delivery.
• Attend daily worksite meetings to address progress, planning. engineering and HSE issues,Create demonstrable value for customers by understanding their drivers and critical success factors.
• Deliver continuously improving performance, benchmarked as top tier in the industry.
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation, and reliability of designs.
• Contribute to excellent HSE performance throughout the engineering phase of the project life cycle.
• Keep track on the execution schedule and report any issues to stakeholders.
• Supervision of construction activities.
• Support the OR/CSU team in the handover of equipment and documentation to the operation team.
• Monitor contractor performance and ensure specifications/approved procedures and applicable MOC (if any) are implemented.
• Provide support for onshore fabrication activities at contractor’s yards, including load-out.
• Supervise relevant aspects of offshore installation/construction works.
• Ensure the safe and effective deployment of digital tools to ald construction management, work optimisation offshore, and materials management.
• Perform all other duties as assigned by supervisor.
• Review assigned contractor deliverables to ensure compliance with project specifications, relevant codes and standards, and best industry practices within contractual review periods.
• Review of construction drawings for all items across the BN EPC1 for installation and construction activities, including providing support for development of work packages.
• Balance technical assurance and commercial considerations to deliver construction scope effectively.
• Contribute to the development and deployment of fit for purpose quality plan and Inspection and Test Plan (ITP), Acceptance Tests Procedures (FAT/IFAT/SAT) including Materials Management Procedures for the Project.

Requirements
The Construction Engineer (E&I) shall have following qualifications and experiences:

• Bachelor’s Degree in Engineering and a Registered Professional Engineer.
• 15 years of experience in design and construction of offshore oil and gasproduction facilities and experience in supporting FPSO in a project management role.
• Engineering experience in electrical/IC&A systems installations. Integration and technical interface management.
• Broad knowledge and experience of Project Management techniques. tools, and practices.
• Thorough knowledge of all aspects of construction management, project management and business management including scope, resource, cost. quality, communications, stakeholder, risk, interface, and procurement management.
• Must be familiar with codes, standards, regulations, and practices applicable to the design and construction of offshore production facilities (IEC, API, ASME, ANSI, AGA, ISA etc).
• Very strong Contract Management skill and ability to deliver using third party contractors.
• Proven track record of having successfully delivered portfolio brownfield projects in the offshore/deep water environment with exposure to EPC contract/contractor management.
• Strong HSE commitment and demonstrated HSE leadership skills.
• Solid background in all aspects of EP project execution including design, procurement, fabrication, installation, commissioning, and start-up.
• Experienced in key customer and stakeholder management.
• Excellent leadership skills. strategic thinker and pragmatic Engineer.
• High personal energy level and a proven track record in achieving stretched personal and business goals.
• The candidate must demonstrate strong organizational abilities, good human and public relations skill and strong operational safety awareness.
• Ability to work and manage in a diverse, multi-cultural environment.
• BOSIET/Approved Offshore Medical.
• Demonstrated experience as Construction Lead, Project Lead or Manager in at least 3 projects of at least $5MM total value.
• Medically Certified fit to work.
• Thorough knowledge of offshore engineering construction methods including its practice and procedures.
• Computer literate, with proficiency in the use of MS suites.
• Must have knowledge/skill level in HSSE and applications within the Oil and gas Industry.
• Excellent Communication skill (written and oral).
• Team player with ability to collaborate effectively with internal and external stakeholders to ensure project alignment and successful delivery.
• Able to identify opportunities for optimising systems/package designs, execution strategy etc, and proffer competitive and robust solutions which positively impact cost, schedule and flawless delivery for maximized value.
• Ability to work in a multi-cultural environment

Justification:

• The Construction Engineer Role is currently required additionally to reinforce the E&I construction team for the adequacy required to ensure critical preparations towards offshore readiness and execution as the project transitions into offshore execution phase.
• To ensure the project’s successful execution considering safe and flawless delivery, it is necessary to fill the positions provisioned in the Project organogram as soon as possible.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: SC Commercial Analyst

Location: Nigeria
Employment Type: Full-time
Team: Contracting / Procurement

What’s the Role?

• We are seeking a results-driven and ethically grounded Commercial Lead to drive procurement excellence, ensure rapid and compliant order fulfilment, and guide sourcing decisions aligned with business priorities.
• The ideal candidate will combine strong commercial acumen, negotiation skills, and stakeholder management experience to deliver value in a dynamic, high-demand environment.

Where You Fit In

• As a Commercial Lead, you will be a key player in ensuring the seamless execution of procurement operations, with a strong focus on ethical sourcing, compliance, and delivering value to the business.
• You’ll work closely with cross-functional teams to translate business requirements into procurement actions that drive operational efficiency, cost-effectiveness, and timely delivery.
• This role is ideal for a commercially minded supply chain professional who thrives in high-pressure environments, understands local market complexities, and is committed to continuous improvement.

Your Further Accountabilities Will Include:

• Lead procurement activities to ensure timely and cost-effective fulfilment of materials and services.
• Reviewing technical specifications of materials and ensuring all purchases meet quality and compliance standards.
• Prioritize and process requisitions in line with company activity plans and supply chain strategies.
• Drive negotiation, tendering, and evaluation processes to secure best-value outcomes while adhering to compliance standards.
• Advise internal stakeholders on appropriate procurement channels and support their decision-making.
• Ensure procurement operations align with the Nigeria Local Content Development Act and company governance.
• Establish cost parameters and maintain accurate purchase budgets and forecasts.
• Make professional and time-sensitive decisions in a fast-paced, high-volume procurement environment.
• Collaborate cross-functionally to meet business needs efficiently while maintaining compliance and ethical sourcing practices.

Requirements
What we need from you:

• A strong foundation in sourcing, negotiation, and procurement processes, ideally with x years of end-to-end supply chain experience.
• Proven ability to analyse procurement data, drive process improvement, and implement sustainable sourcing strategies.
• Demonstrated experience using SAP and ARIBA ERP systems to manage procurement activities
• Sound knowledge of procurement regulations, including the Nigeria Local Content Development Act, and ability to apply these principles in day-to-day procurement.
• Exceptional negotiation skills, commercial acumen, and working knowledge of procurement risk and compliance frameworks.
• Excellent communication skills and ability to collaborate effectively with technical, commercial, and legal stakeholders.
• Power BI (Microsoft) business intelligence, date visualization, real-time dashboards and AI-powered insights etc will be an added advantage.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: HSE Officer, Bonga North Fabrication Yard

Location: Nigeria
Service Type: Provide Project HSSE support for capital projects – Bonga North.

Service Description

• Drive implementation of Company aspiration of a unified “One Team, One Yard” HSSE strategy at the fabrication yard
• Constructively challenge unsafe practices amongst project execution team members to improve effectiveness of the overall fabrication yard team.
• Maintain close links with the project HSSE Lead for advice, information and guidance on Company policy
• Drive a compliance culture among the workforce via implementation of industry safe work practices for IOGP 577, LOD1 Start Work Checks, CSSS and visible safety leadership.
• Ensure timely reporting of incidents and close out of incident recommendations.
• Drive implementation of the project HSE plan for the fabrication yard and support the delivery of specific HSE trainings including onboarding/inductions for all new on signers.
• Ensure planned fabrication yard HSE activities are conducted as per plan in the overarching Bonga North HSSE Must Wins e.g. Drills, HSE meetings, LOD1 Start Work Checks, etc.
• Collating HSE performance data from the fabrication yard as per agreed HSE performance indicators. Prepare daily/weekly/monthly HSE reports and share with the HSE Lead for integration into project reports.
• Drive implementation of HSE campaigns at the worksite to drive improved safety culture and good practices.
• Assist with ad-hoc HSE tasks/projects as required.
• Support the Project team with the implementation of established HSE policies, guidelines and procedures to ensure that the Project objectives are met.
• Spend most of the time on the worksite to monitor performance of work and to coach and support contractor personnel to achieve an acceptable health and safety, health and performance.
• Support Review of Work packs, JHA and other input to PTW Participate in HAZID, SIMOPS workshop and other required HEMP studies
• Provide coaching through duration of Bonga North Project fabrication yard activities and support execution team to deliver Goal Zero on site
• Support site TBT, TRIC reviews and other LOD1 site assessments.
• Provide onsite coaching, support and advice in the areas of HSE to the contractor to ensure that project safety, health and environmental requirements are met.
• Participate in contractor planning meetings, risk assessments, toolbox talks, safety meetings, etc.
• Where necessary intervene to STOP WORK where appropriate HSE standards are not met.

Key Challenges:

• Value delivery in HSSE & SP in PMF Goal Zero programs for Bonga North Project, ensuring the safe delivery operation of BN projects

Job Knowledge, Skills & Experience

• An accredited University Degree in Science or Engineering and professional qualifications in a technical, or HSSE related discipline
• At least 5 years’ experience in Operational Safety/Project HSE Management in the EP industry in Engineering / Projects.
• Good understanding of the business risks.

Competencies:

• Awareness in use of Design safety tools such as JSA, HAZID, HSE Cases, Bowties, HAZID, Emergency Response, Use of IOGP, Shell SEAM Framework, Audit, reviews, incident investigation, etc.
• Skilled in Safe Systems of Work (JHA, PTW, TBT)
• Skilled in analysing and solving problems, communicating, and persuading and being personally creative and innovative.
• Good knowledge of Nigerian safety laws regulations and permits.

Behaviours:

• Learner mindset
• Strong focus on Enterprise First and business partnering.
• Passion, drive and commitment for SE performance excellence
• Excellent and proactive communication
• Cultural Awareness & Teamwork.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: Construction Engineer (Mechanical / Structural)

Location: Nigeria

Job Description

• To deliver construction engineering, involving planning, preparations and execution activities with E&I/C deliverables for assigned projects and ensure timely completion to the required quality standards considering safety and ethical compliance.

Dimensions:

• Deliver Construction Engineering scope for the BN EPC1 project.
• Work in a multi-discipline project team providing all necessary support towards ensuring quality work delivery on schedule.
• Work and guide contractor team in delivering the construction in EPC1 systems, equipment packages etc. in line with project specifications.
• Deliver fabrication/package manufacturing support and other onshore readiness activities for the BN EPC1 projectNo direct reports.
• No CAPEX budgets.

Responsibilities

• Adhere to and work in line with company guidelines on Health, Safety, Security, and Environment (HSSE) and Ethics & Compliance.
• Drive the implementation of E&I/C construction engineering and execution requirements in the design, fabrication, testing, installation, pre-commissioning, and commissioning of assigned project.
• Ensure the final products delivered meets the applicable code requirements as well as the project scope of work and specifications.
• Be responsible for delivery of assigned activities for the BN EPC1 Projects Portfolio from Detailed Design, Construction, Commissioning and Handover.
• Responsible for managing the planning, design, directing, coordinating and supervision of construction activities for electrical, instrumentation, control systems/piping interface deliverables.
• Facilitate Constructability and construction readiness reviews and be responsible for design reviews to ensure constructability requirements are embedded in design and designs are safe.
• Develop construction execution strategy, construction execution and workface execution plans.
• Responsible for reviewing and securing support for E&I/C. drawings and designs prior to implementation relevant for construction phase.
• Expected to be subject matter experts on constructability requirements and complete routine tests to ensure all legal regulations are complied with.
• Ensure adherence to Shell HSSE standards and to deliver within budget i.e. cost control and accounting, schedule, and quality requirements.
• Managing delivery via contractors and resources drawn from the matrix organisation.
• Develop the scope of assigned project and progress though the relevant decision gates.
• Preparation of construction execution packages to define and assure the scope, with execution requirements as appropriate for the project.
• Preparation of deliverables in alignment with the Company requirements.
• Must be capable of determining the organizational structure required to accomplish the assigned project functions efficiently and in accordance with approved plans and schedules.
• Responsible for ensuring assurance of construction schedules and management of cost related components towards project goals safely and efficiently as required.
• Stakeholder management and engagement with relevant parties associated with interfaces and integrations for project successImplementation of contract strategy to execute the assigned scope.
• Manage the relationships with various discipline engineers, contract packages and other stakeholders.
• Ensure projects are performed in accordance with the terms and conditions in the relevant contract documents.
• Provide adequate guidance and leadership to the design and planning personnel in the development of the project plan.
• Planning, managing, and integrating scopes & resources allocations in brownfield offshore environment.
• Provision of construction inputs into SIMOPS, HAZOP, HAZID and other technical safety activities.
• Provision of equipment assurance for compliance to standards/requirements.
• Managing PTW during offshore construction execution on Bonga FPSOResponsible for preparation, review and management of construction work packages for electrical, instrumentation, control systems and integration related work packages.
• Initiation and implementation of changes using the Shell’s change management process.
• Review and implementation of Construction Site Safety Systems at onshore and offshore construction worksites.
• Development and implementation of resource plans and forecasts Plan, sequence, and execute offshore construction and installation activities.Co-ordinate and verify applicable worksite protocols not limited to; mobilization, and equipment checklist/certification.
• Review Material-Take-Off (MTO) documentations and identify critical equipment and installation methodologyEnsure that site works are performed in accordance with approved procedures and standard practices.
• Interface with the Offshore project leadership, including OIM, operations and maintenance teams to ensure seamless and safe project delivery.
• Attend daily worksite meetings to address progress, planning. engineering and HSE issues,Create demonstrable value for customers by understanding their drivers and critical success factors.
• Deliver continuously improving performance, benchmarked as top tier in the industry.
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation, and reliability of designs.
• Contribute to excellent HSE performance throughout the engineering phase of the project life cycle.
• Keep track on the execution schedule and report any issues to stakeholders.
• Supervision of construction activities.
• Support the OR/CSU team in the handover of equipment and documentation to the operation team.
• Monitor contractor performance and ensure specifications/approved procedures and applicable MOC (if any) are implemented.
• Provide support for onshore fabrication activities at contractor’s yards, including load-out.
• Supervise relevant aspects of offshore installation/construction works.
• Ensure the safe and effective deployment of digital tools to ald construction management, work optimisation offshore, and materials management.
• Perform all other duties as assigned by supervisor.
• Review assigned contractor deliverables to ensure compliance with project specifications, relevant codes and standards, and best industry practices within contractual review periods.
• Review of construction drawings for all items across the BN EPC1 for installation and construction activities, including providing support for development of work packages.
• Balance technical assurance and commercial considerations to deliver construction scope effectively.
• Contribute to the development and deployment of fit for purpose quality plan and Inspection and Test Plan (ITP), Acceptance Tests Procedures (FAT/IFAT/SAT) including Materials Management Procedures for the Project.

Requirements
The Construction Engineer shall have following qualifications and experiences:

• Bachelor’s Degree in Engineering and a Registered Professional Engineer.
• 15 years of experience in design and construction of offshore oil and gasproduction facilities and experience in supporting FPSO in a project management role.
• Engineering experience in systems integration and technical interface management.
• Broad knowledge and experience of Project Management techniques tools, and practices.
• Thorough knowledge of all aspects of construction management, project management and business management including scope, resource, cost, quality, communications, stakeholder, risk, interface, and procurement management.
• Must be familiar with codes, standards, regulations, and practices applicable to the design and construction of offshore production facilities (APLASME, ANSI AGA, ISA etc).
• Very strong Contract Management skill and ability to deliver using third party contractors.
• Proven track record of having successfully delivered portfolio brownfield projects in the offshore/deep water environment.
• Strong HSE commitment and demonstrated HSE leadership skills.Solid background in all aspects of EP project execution including design, procurement, fabrication, installation, commissioning, and start-up.
• Experienced in key customer and stakeholder management.
• Excellent leadership skills, strategic thinker and pragmatic Engineer.
• High personal energy level and a proven track record in achieving stretched personal and business goals.
• The candidate must demonstrate strong organizational abilities. good human and public relations skill and strong operational safety awareness.
• Ability to work and manage in a diverse, multi-cultural environment.
• BOSIET/Approved Offshore Medical.
• Demonstrated experience as Construction Lead, Project Lead or Manager in at least 3 projects of at least $10MM total value.
• Medically Certified fit to work.
• Thorough knowledge of offshore engineering construction methods including its practice and procedures.
• Computer literate, with proficiency in the use of MS suites.
• Must have knowledge/skill level in HSSE and applications within the Oil and gas Industry.
• Excellent Communication skill (written and oral).
• Team player with ability to collaborate effectively with internal and external stakeholders to ensure project alignment and successful delivery.
• Able to identify opportunities for optimising systems/package designs, execution strategy etc., and proffer competitive and robust solutions which positively impact cost, schedule and flawlessdelivery for maximized value.
• Ability to work in a multi-cultural environment.

Justification:

• The Construction Engineer Role is currently required additionally to reinforce the E&I construction team for the adequacy required to ensure critical preparations towards offshore readiness and execution as the project transitions into offshore execution phase.
• To ensure the project’s successful execution considering safe and flawless delivery, it is necessary to fill the positions provisioned in the Project organogram as soon as possible.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: Senior Construction Engineer, Onshore Fab-yard (Local)

Location: Nigeria
Employment Type: Full-time
Team: Contracting / Procurement
Organisation / Department: Bonga North (BN), Deepwater Projects SNEPCO/EPC1
Reports to: BN Construction Lead

Brief Description 

• To deliver construction engineering activities and deliverables for assigned projects and ensure timely completion to the required quality standards.

Dimensions

• Deliver Construction Engineering scope for the BN EPC1 project.
• Work in a multi-discipline project team providing all necessary support towards ensuring quality work delivery on schedule.
• Work and guide contractor team in delivering the construction in EPC1 systems, equipment package in line with project specifications.
• Deliver the onshore fabrication scope of the BN EPC1 project
• No direct reports.
• No CAPEX budgets.

Principal Accountabilities

• Adhere to and work in line with company guidelines on Health, Safety, Security, and Environment (HSSE) and Ethics & Compliance.
• Drive the implementation of construction engineering requirements in the design, fabrication, testing, installation, pre-commissioning, and commissioning of assigned project.
• Ensure the final products delivered meets the applicable code requirements as well as the project scope of work and specifications.
• Be responsible for delivery of assigned projects from the BN EPC1 Projects Portfolio from early engineering through Detailed Design, Construction, Commissioning and Handover.
• Responsible for managing the planning, design, directing and supervision of construction projects.
• Facilitate Constructability and construction readiness reviews and be responsible for design reviews to ensure constructability requirements are embedded in design and designs are safe.
• Develop construction execution strategy, construction execution and workface execution plans.
• Responsible for reviewing and inspecting all drawings and designs prior to implementation.
• Expected to be subject matter experts on constructability requirements and complete routine tests to ensure all legal regulations are complied with.
• Ensure adherence to Shell HSSE standards and to deliver within budget i.e. cost control and accounting, schedule, and quality requirements.
• Managing delivery via contractors and resources drawn from the matrix organisation.
• Develop the scope of assigned project and progress though the relevant decision gates.
• Preparation of engineering package to define the scope appropriate for the project phase.
• Preparation of deliverables in alignment with the Company requirements
• Must be capable of determining the organizational structure required to accomplish the assigned projects efficiently and in accordance with approved plans and schedules.
• Responsible for ensuring preparation of schedules and cost estimate for the phase of the project as required.
• Stakeholder management and engagement with relevant government agencies
• Development of contract strategy to execute the assigned scope.
• Manage the relationships with various discipline engineers, contract packages and other stakeholders.
• Ensure projects are performed in accordance with the terms and conditions in the relevant contract documents.
• Ensure quality of technical work and the technical integrity, functionality, constructability, safe operation, and reliability of designs.
• Contribute to excellent HSE performance throughout the engineering phase of the project life cycle.
• Keep track on the execution schedule and report any issues to stakeholders.
• Supervision of construction activities.
• Support the CSU team in the handover of equipment and documentation to the operation team.
• Monitor contractor performance and ensure specifications / approved procedures and applicable MOC (if any) are implemented.
• Manage onshore fabrication activities at contractor’s yards, including load-out.
• Supervise all aspects of onshore installation/construction works.
• Perform all other duties as assigned by supervisor.
• Review contractor deliverables to ensure compliance with project specifications, relevant codes and standards, and best industry practices within contractual review periods.
• Review of construction drawings for all items across the BN EPC1 for installation and construction activities, including providing support for development of work packages.
• Balance technical assurance and commercial considerations to deliver construction scope effectively.
• Contribute to the development and deployment of fit for purpose quality plan and Inspection and Test Plan (ITP), NDT including materials management procedure for the Project.

Requirements
The senior Construction Engineer onshore Fab-yard shall have following
qualifications and experiences:

• Bachelor’s Degree in Engineering and a Registered Professional Engineer
• 8-10 years of experience in design and construction of offshore oil and gas production facilities and experience in supporting FPSO in a project management role.
• Engineering experience in systems integration and technical interface management.
• Broad knowledge and experience of Project Management techniques, tools, and practices.
• Thorough knowledge of all aspects of construction management, project management and business management including scope, resource, cost, quality, communications, stakeholder, risk, and procurement management.
• Must be familiar with codes, standards, regulations, and practices applicable to the design and construction of offshore production facilities (API, ASME, ANSI, AGA, ISA etc).
• Very strong Contract Management skill and ability to deliver using third party contractors.
• Proven track record of having successfully delivered portfolio brownfield projects in the offshore/deep water environment.
• Strong HSE commitment and demonstrated HSE leadership skills.
• Solid background in all aspects of EP project execution including design, procurement, fabrication, installation, commissioning, and start-up.
• Experienced in key customer and stakeholder management.
• Excellent leadership skills. strategic thinker and pragmatic Engineer
• High personal energy level and a proven track record in achieving stretched personal and business goals.
• The candidate must demonstrate strong organizational abilities, good human and public relations skill and strong operational safety awareness.
• Ability to work and manage in a diverse, multi-cultural environment.
• BOSIET/Approved Offshore Medical if expected to travel offshore.
• Demonstrated experience as Construction Lead, Project Lead or Manager in at least 3 projects of at least $10MM total value.
• Medically Certified fit to work.
• Thorough knowledge of offshore engineering construction methods including its practice and procedures.
• Computer literate, with proficiency in the use of MS suites including rotating equipment design spreadsheets.
• Must have knowledge/skill level in HSSE and applications within the Oil and gas Industry.
• Excellent Communication skill (written and oral)
• Team player with ability to collaborate effectively with internal and external stakeholders to ensure project alignment and successful delivery.
• Ability to work in a multi-cultural environment

Justification:

• The Senior Construction Engr; Fab-yard is under resourced for the work volume especially as the project transitions into detailed engineering.
• To ensure the project’s successful and high-quality delivery, it is necessary to fill the positions provisioned in the Project organogram as soon as possible.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.

Job Title: Material / Logistic Coordinator

Location: Nigeria
Organisation / Department: Bonga North (BN), Deepwater Projects SNEPCO
Reports to: Construction Lead

Brief Description

• To coordinate, deliver material and logistic activities including DED input to deliverables for assigned projects and ensure timely completion to the required quality standards.

Dimensions

• Deliver the Material/ logistic scope for the BN EPC1 project.
• Work in a multi-discipline project team providing all necessary support towards ensuring quality work delivery on schedule.
• Work and guide contractor team in delivering the required installation for EPC1 systems, equipment package in line with project specifications.
• No direct reports.
• No CAPEX budgets.

Principal Accountabilities

• Adhere to and work in line with company guidelines on Health, Safety, Security, and Environment (HSSE) and Ethics & Compliance.
• Ensure adherence to Shell HSSE standards and to deliver within budget i.e. cost control and accounting, schedule, and quality requirements.
• Work with the various work package engineers to ensure that the design and construction expectations are met with regards to safety, quality, cost, and schedule
• Have Technical knowledge of Oil and Gas materials and Standard procurement competency and contract management Certified CIPM) which will professionally carry out the following duties:
• Liaising with the procurement team and vendors for expediting material deliveries services for offshore construction Compiles and maintains material and parts inventory and status information.
• To ensure proper sparing and effective ROS (required on Site) for all procured items, all spare parts needed on site.
• Expedite Purchase Orders to ensure on timely delivery.
• Initiate update of Bill of Materials or Material Masters
• Carry out spend, cost and market analysis and identify opportunities for cost savings.
• Review Material Supply Chain metrics and make proposals for improvement.
• Maintain the work-pack library to avoid necessary rework in future.
• Ensure completeness and accuracy of Purchase Requisition specification.
• Identify where materials can be delivered under existing Outline Agreement
• Define the required quality assurance (expediting and special inward goods inspection) for critical materials.
• Arrange and monitor expediting.
• Follow up on Purchase Order with supplier and stay in contact with supplier for critical materials.
• Receive confirmation from warehouse manager on receipt of material/compliance to spec.
• When material is not received in good order or too late, liaise with WP to initiate moving out LAFD (Latest Allowable Finish Date) where applicable and to escalate to company project team.
• Implement work processes including Management of Change, HSE MS, Technical Assurance frameworks etc.
• Gather and share learnings.
• Drive Enterprise First behaviours with regards to Leadership, Accountability and Teamwork. Drive Top Quartile behaviours.
• Mentoring material and logistic team.
• Perform all other duties as assigned by supervisor.
• Stakeholder management and engagement with relevant government agencies
• Ensure material and logistic requirements are performed in accordance with the terms and conditions in the relevant contract documents.
• Development and implementation of material and logistic resource for planning and forecasts
• Create demonstrable value for customers by understanding their drivers and critical success factors.
• Contribute to excellent HSE performance throughout the engineering and execution phase of the project life cycle.
• Keep track on the material and logistic schedule and report any issues to stakeholders.
• Supervision of material and logistic activities.

Requirements
The Material/logistic co-ordinator shall have following qualifications and
experiences:

• Minimum of Bachelor’s Degree in Engineering or Science related field preferably.
• Fifteen (15) years Minimum working experience on material management or warehouse experience.
• 15 years’ industry experience in capital oil and gas projects.
• Skill of frontline operations, construction, and projects.
• Knowledge of methods, materials, tools, and equipment in the installation of oil and gas exploration equipment
• Skill in Inventory Management
• Skill in store management, handling of materials & consignment of goods
• Skill in ordering / tracking of materials via SAP. proficiency using other materials management tools.
• Proficiency with Digital ‘Track and Trace’ tools will be an added advantage.
• Able to learn and use SAP BP experience – work orders, shipping, inventory transfer transactions.
• Ability to communicate effectively in written and verbal form.
• Proficient in the use of SAP-Material Management Module and Microsoft office.
• Effective communication in written and spoken English.
• Registered member of CIPM
• Good use of measuring tools
• Excellent analytical, oral, and written communication skills
• Able to lead a team of people from diverse cultural backgrounds.
• Demonstrated proficiency in computer skills, including all Microsoft office tools.
• Commercially astute. Proven track record in contract management.
• Ability to deal with multiple often conflicting goals and priorities.
• Provides a clear and decisive leadership in an environment of many competing priorities and diverse activities and issues.
• Strategic thinker and pragmatic solution provider
• Excellent interpersonal and leadership skills, well developed communication skills i.e. report writing and presentation are essential.
• High personal energy level and a proven track record in achieving stretching personal and business goals.
• Strong commitment to learning and continuous improvement
• Experience in coaching, mentoring and motivating others to be successful.
• Experienced in key customer and stakeholder management.
• Excellent leadership skills. strategic thinker and pragmatic lead.
• High personal energy level and a proven track record in achieving stretched personal and business goals.
• The candidate must demonstrate strong organizational abilities, good human and public relations skill and strong operational safety awareness.
• Ability to work and manage in a diverse, multi-cultural environment.
• Must have knowledge/skill level in HSSE and applications within the Oil and gas Industry.
• Excellent Communication skill (written and oral)
• Team player with ability to collaborate effectively with internal and external stakeholders to ensure project alignment and successful delivery.
• Ability to work in a multi-cultural environment

Justification:

• The material and logistic co-ordinator is under resourced for the work volume especially as the project transitions into detailed engineering.
• To ensure the project’s successful and high-quality delivery, it is necessary to fill the positions provisioned in the Project organogram as soon as possible.

Application Closing Date
12th November, 2025.

How to Apply
Interested and qualified candidates should send their Resume to: admin@fortisengineering.net using the Job Title as the subject of the mail.