Recruitment at Sterling Oil Exploration and Energy Production Company

Recruitment at Sterling Oil Exploration and Energy Production Company

Sterling Oil Exploration and Energy Production Company (SEEPCO) – We are an Oil Exploration & Energy Production Company Limited and we are continuously striving to innovate, grow and impact communities around us.

We are recruiting to fill the position below:

Job Title: Civil Engineer – Office Design

Location: Lagos

Responsibilities

• Lead civil engineering activities for FEED, detailed engineering, and EPC execution.
• Prepare civil drawings, structural design calculations, and technical specifications.
• Supervise construction of foundations, structures, buildings, roads, and drainage systems.
• Ensure compliance with project quality, safety, and environmental standards.
• Coordinate with process, mechanical, and electrical teams for structural support and interfaces.
• Review vendor drawings and documents related to civil/structural works.
• Monitor contractor performance and ensure adherence to timelines and specifications.
• Conduct site inspections, report progress, and resolve technical issues.
• Ensure proper material selection, testing, and quality control.
• Participate in HSE and environmental compliance audits.
• Provide input for project cost estimation, BOQ, and procurement.
• Support commissioning and handover of civil structures to operations.

Selection Criteria

• Expert knowledge of structural design codes and industrial foundations.
• Should have proven track record in civil engineering for industrial projects.
• Should possess required Hands-on experience with site supervision and quality assurance.
• Should have proven ability to manage FEED and EPC civil work execution.
• Should possess required experience in process optimization and efficiency improvement.

Experience:

• 8–10 years of experience in civil engineering for industrial / chemical / process plants.
• Minimum 5 years of experience in EPC project execution.
• Experience in structural design for heavy chemical equipment, foundations, and pipe racks.
• Exposure to chemical process plants preferred.
• Experience with site supervision, contractor management, and quality control.

Functional Skills:

• Expertise in structural design, reinforced concrete, steel structures, and civil works for industrial plants.
• Knowledge of civil/structural codes: IS, BS, ASTM, ACI, or equivalent.
• Experience in foundation design for heavy equipment and electrolysis cells.
• Proficiency in AutoCAD, STAAD Pro, or equivalent structural analysis software.
• Understanding of soil investigation, piling, and ground preparation.
• Knowledge of water drainage, roads, hardstandings, and plant utilities layout.
• Ability to interpret P&IDs, layouts, and coordinate with process/mechanical teams.
• Quality assurance, inspection, and site supervision experience.

Application Closing Date
1st March, 2026.

How to Apply
Interested and qualified candidates should send their updated CV to: Careers@energy-mgt.com using “Civil Engineer – Office Design” as the subject of the email.

Job Title: Electrical Engineer – Office Design

Location: Lagos

Key Responsibilites

• Design and review power distribution, LV/MV/HV systems, and switchgear layouts.
• Prepare electrical datasheets, specifications, and load lists.
• Coordinate cable routing, earthing, lighting, and power supply systems.
• Oversee procurement, FAT, and installation of electrical equipment.
• Ensure compliance with IEC, IEEE, and local electrical standards.
• Support commissioning and troubleshooting of electrical systems.
• Interface with mechanical and instrumentation teams for electrical integration.

Qualification

• B.E / B.Tech in Electrical Engineering (Mandatory).

Experience:

• 8 – 10 years in chemical/process plants.
• FEED & EPC execution of electrical systems.

Selection Criteria:

• Should have proven experience in electrical design and execution in chemical plants.
• Should possess required ability to manage contractors and vendor coordination.
• Should possess required experience and knowledge of Chlor-Alkali specific electrical requirements.

Functional Skills:

• Knowledge of LV, MV, and HV electrical systems.
• Transformer, switchgear, motor, and protection system knowledge.
• AutoCAD / Electrical design software proficiency.
• Knowledge of hazardous area classification (ATEX / IECEx) for chlorine areas.
• Electrical load calculation and power factor correction.

Application Closing Date
3rd March, 2026.

How to Apply
Interested and qualified candidates should send their CV to: Careers@energy-mgt.com using “Electrical Engineer – Office Design” as the subject of the mail.

Job Title: Heavy Earth Moving Machines (HEMM) Mechanical Engineer

Locations: Akwa Ibom, Cross River, Imo, and Rivers
Employment Type: Full-time
Slot: 50 Openings

Job Summary

• HEMM Mechanics ensures the operational efficiency and safety of heavy machinery such as excavators, bulldozers, dump trucks, loaders, graders, and cranes.
• These professionals typically work in construction sites, mining operations, quarries, infrastructure projects, and equipment workshops.

Typical Equipment Worked On:

• Excavators
• Bulldozers
• Wheel loaders
• Motor graders
• Backhoe loaders
• Dump trucks
• Compactors and rollers
• Cranes.

Key Responsibilities
Maintenance & Inspection:

• Perform routine preventive maintenance (oil changes, filter replacements, lubrication).
• Inspect engines, hydraulic systems, transmissions, brakes, and electrical systems.
• Conduct safety inspections and ensure compliance with site regulations.

Diagnosis & Troubleshooting:

• Diagnose mechanical, hydraulic, and electrical faults.
• Use diagnostic tools and software for fault detection.
• Interpret technical manuals and schematics.

Repair & Overhaul:

• Repair or replace defective components (engines, gearboxes, hydraulic pumps).
• Perform engine overhauls and major rebuilds.
• Weld, fabricate, and modify machine parts when necessary.

Documentation:

• Maintain service logs and maintenance records.
• Prepare breakdown reports.
• Recommend spare parts and repair schedules.

Safety Compliance:

• Follow workplace safety standards.
• Use personal protective equipment (PPE).
• Ensure machinery meets operational safety requirements.

Requirements

• Qualification: OND, SSCE, NECO, Trade Tests 1, 2, 3.
• Experience: Minimum of 10 years.

Application Closing Date
30th March, 2026.

How to Apply
Interested and qualified candidates should send their updated CV to: emeka.uche@energy-mgt.com using “HEMM Mechanic – Rivers State or your state of preference” as the subject of the email.

Job Title: Heavy Earth Moving Machine (HEMM) – Mechanic

Locations: Akwa Ibom, Imo, and Rivers
Sector: Upstream

Job Summary

• The Heavy Earth Moving Machine Mechanic will be responsible for the inspection, maintenance, diagnosis, and repair of heavy construction and mining equipment, ensuring optimal performance, safety, and minimal downtime.

Equipment to Handled:

• Excavators
• Bulldozers
• Wheel Loaders
• Motor Graders
• Dump Trucks / Tippers
• Crawler Cranes and other heavy-duty machinery

Required Qualifications & Skills

• Diploma in Mechanical Engineering, SSCE, Trade Tests 1,2,3, or equivalent technical qualification
• Proven experience as a heavy equipments or earth moving machine mechanic
• Strong knowledge of diesel and CNG engines, hydraulic systems, and powertrain systems
• Ability to read and interpret technical drawings, service manuals, and schematics
• Proficiency in the use of diagnostic equipment and hand/power tools
• Strong troubleshooting and problem-solving skills
• Good understanding of workplace safety procedures and proper PPE usage
• Safety & Physical Requirements
• Ability to work in physically demanding environments
• Strict adherence to safety standards and procedures.

Experience:

• Minimum of 10 years’ relevant experience in the same role
• Prior experience working in an automobile or heavy equipment company is an added advantage

Salary
Open to negotiation.

Application Closing Date
30th March, 2026.

How to Apply
Interested and qualified candidates should send their updated CV to: emeka.uche@energy-mgt.com using Job Title and Location as the subject of the mail.

Note: Only Qualified candidates will be shortlisted.

Job Title: Auto Mechanic (Heavy Duty Trucks)

Locations: Akwa Ibom, Delta, Imo and Rivers
Employment Type: Full-time

Overview

• A Heavy Truck Mechanic who would beresponsible for inspecting, diagnosing, repairing, and maintaining heavy-duty trucks and trailers such as Howo, Man, Atros, Foton to ensure safe and efficient operation.
• This role involves working with diesel ans CNG engines, electrical systems, hydraulic systems, and computerized diagnostics while adhering to safety and quality standards.

Key Responsibilities

• Inspect, diagnose, and repair mechanicaland hydraulic issues in heavy-duty trucks and trailers
• Perform routine maintenance such as engine overhauling, transmission, oil changes, brake inspections, air systemand fluid checks
• Repair or replace engines, transmissions, axles, suspensions, steering, and braking systems
• Use diagnostic tools and computerized systems to identify faults
• Conduct preventive maintenance to reduce downtime and extend vehicle life
• Test vehicles after repairs to ensure proper performance and safety
• Maintain accurate service and repair records
• Comply with workplace safety policies and environmental regulations

Required Skills and Qualifications

• Proven experience as a heavy truck or diesel mechanic
• Strong knowledge of diesel & CNG engines, air brake systems, and electrical systems
• Ability to read technical manuals and diagnostic reports
• Proficiency with hand tools, power tools, and diagnostic equipment
• Good problem-solving and troubleshooting skills
• Physical ability to lift heavy parts and work in various positions

Required Experience:

• Minimum of 10 years cognate experience as an auto mechanic

Preferred Qualifications:

• OND, SSCE, NECO
• Trade Tests 1, 11, 111

Working Conditions:

• Work may be performed in a workshop or an outdoor environment
• Exposure to noise, grease, and heavy equipment
• May require shift work, overtime, weekends, or on-call duties.

Application Closing Date
20th March, 2026.

How to Apply
Interested and qualified candidates should send their updated CV to: emeka.uche@energy-mgt.com using “Auto Mechanic” as the subject of the mail.

Job Title: Mechanical Engineer (Static Equipment – Office Design)

Location: Lagos

Responsibilities

• Review and prepare design documents for static equipment (Data Sheets, GA Drawings, Fabrication drawings).
• Review Mechanical Design Calculations as per ASME, TEMA, API standards.
• Evaluate vendor technical offers and participate in technical bid evaluations.
• Monitor fabrication, inspection, and testing of pressure vessels, heat exchangers, storage tanks.
• Ensure compliance with chlorine service material requirements (Monel, Hastelloy, PTFE lining, FRP, etc.).
• Supervise erection, alignment, and installation at site.
• Coordinate with Civil, Electrical, Instrumentation, and Process teams.
• Review hydrotest procedures, NDT reports, PWHT records.
• Participate in FAT, inspection, and stage-wise quality checks.
• Ensure compliance with hazardous area and corrosion control requirements.
• Support pre-commissioning, commissioning, and performance guarantee testing.
• Review and close technical queries (TQ), NCRs, and deviations.
• Ensure documentation, as-built drawings, and final dossier submission.

Qualification

• B.E. / B.Tech in Mechanical Engineering (Mandatory):

Experience:

• 8 – 10 years of experience in Chemical / Petrochemical / Refinery plants
• 3 – 5 years direct experience in Chlorine / Caustic / Corrosive service equipment
• Experience in EPC project execution preferred
• Experience in site supervision and commissioning required.

Certifications:

• Any suitable certifications in the field or related field.

Selection Criteria:

• Expert Proven experience in handling static equipment in corrosive environments
• Should have proven track record in FEED & EPC project execution.
• Should possess required Hands-on experience with site supervision and quality assurance.
• Should have proven strong knowledge of chlorine handling equipment.
• Should possess required experience in EPC project lifecycle (Design to Commissioning)
• Should possess required experience and ability to independently review and approve vendor documents.

Functional Skills:

• Strong knowledge of ASME Sec VIII, API 650/620, TEMA, ASTM standards
• Experience in Pressure Vessels, Heat Exchangers, Columns, Storage Tanks
• Knowledge of Corrosion allowance and material selection for chlorine & caustic service
• Understanding of FRP equipment and rubber/PTFE lining systems
• Experience in Piping layout review and stress coordination
• Knowledge of Hydrotesting, Pneumatic testing, NDT methods
• Familiarity with EPC project documentation and procedures
• Experience in shutdown planning and equipment maintenance (advantage)
• Ability to review vendor drawings and fabrication quality
• Proficiency in AutoCAD, STAAD Pro (for static).

Application Closing Date
3rd March, 2026.

How to Apply
Interested and qualified candidates should send their updated CV to: Careers@energy-mgt.com using “Mechanical Engineer – Office Design – Static Equipment” as the subject of the mail.

Job Title: Mechanic – HMV Maintenance

Location: Port Harcourt, Rivers
Employment Type: Full-time

Job Summary

• A foremost Indegenious Oil & Gas exploration organization requires the services of qualified HMV Maintenance Mechanics to strengthen its operations and uphold service excellence.
• The ideal candidates would be responsible for the inspection, diagnosis, repair, and preventive maintenance of heavy motor vehicles to ensure optimal performance, safety, and complianceand regulatory standards.

Key Responsibilities
Vehicle Diagnosis & Repair:

• Diagnose mechanical faults in heavy motor vehicles using diagnostic tools and technical manuals
• Repair or replace faulty engines, gearboxes, axles, suspension systems, and braking systems
• Carry out engine overhauls and major mechanical repairs when required

Preventive Maintenance;

• Perform routine servicing and preventive maintenance on HMVs
• Conduct inspections to identify wear, damage, or potential failures
• Ensure vehicles are maintained according to maintenance schedules

Systems Maintenance:
Maintain and repair:

• Diesel engines and fuel systems
• Transmission and clutch systems
• Steering and suspension systems
• Air and hydraulic braking systems
• Cooling and lubrication systems

Safety & Compliance:

• Ensure all repair work complies with safety standards and roadworthiness regulations
• workshop safety procedures and proper use of tools and equipment
• Maintain clean and safe working conditions.

Requirements

• Age Bracket: 30 – 45 years
• Academic Qualification: OND, SSCE, Trade Test- I, II, III
• Experience: Minimum of 5 years’ experience in the same role. Prior experience working in an automobile company is an added advantage.

Application Closing Date
23rd March, 2026.

How to Apply
Interested and qualified candidates should send their CV to: emeka.uche@energy-mgt.com using the Job title as the subject of the email.

Note

• This role is open for Nigerians living in Nigeria Only
• Only shortlisted and qualified candidates will be contacted.

Job Title: Auto Mechanic ( Cars, Pickups, etc.)

Location: Rivers

Overview

• The Auto Mechanic is responsible for inspecting, diagnosing, repairing, and maintaining vehicles to ensure optimal performance and safety.
• Working within the automotive department, the mechanic uses technical expertise, diagnostic tools, and manufacturer specifications to deliver high-quality repair and maintenance services.

Key Responsibilities

• Inspect vehicles to identify mechanical, electrical, and electronic issues
• Perform routine maintenance such as oil changes, tire rotations, brake service, and fluid checks
• Diagnose problems using computerized diagnostic equipment and manual testing methods
• Repair or replace defective parts, including engines, transmissions, suspension systems, steering systems, and exhaust components
• Test vehicles after repairs to ensure proper operation and safety standards are met
• Maintain accurate records of inspections, repairs, parts used, and labor performed
• Follow manufacturer guidelines, safety standards, and departmental procedures
• Communicate clearly with service advisors or supervisors regarding repair needs and timelines
• Keep the work area clean, organized, and compliant with safety regulations

Qualifications

• OND, SSCE, Trade test or certificate of apprenticeship
• Proven experience as an auto mechanic or automotive technician
• Strong knowledge of vehicle systems and automotive repair techniques
• Ability to use diagnostic tools, hand tools, and shop equipment

Skills & Competencies:

• Mechanical aptitude and problem-solving skills
• Attention to detail and accuracy
• Time management and ability to meet deadlines
• Physical stamina and ability to lift heavy parts
• Teamwork and effective communication.

Application Closing Date
29th February, 2026.

How to Apply
Interested and qualified candidates should send their CV to: emeka.uche@energy-mgt.com using “Auto Mechanic – Rivers” as the subject of the mail.