Recruitment at Nautilus Nigeria Engineering and Construction Limited

Nautilus Nigeria Engineering and Construction (NNEC) Limited’s mission is to provide all clients with high quality, cost-effective, on-schedule engineering, project management, inspection and environmental services. NNEC is committed to design and build more efficient, safer, reliable, and environmentally friendly facilities for the betterment of our clients and their communities.

We are recruiting to fill the position below:

Job Title: Rig Supervisor III

Location: Abia
Job type: Full-time (On-site)

Main Fuctions

• Represents the company on a rig site to support the safe and efficient execution of well plans.
• Is the primary contact for rig and third party personnel to ensure logistics for personnel, equipment and services are appropriately organized and managed.

Task and Responsibilities

• Responsible for communicating expectations regarding safety, security, health, and environment; provides guidance and supports managing Safety, Security, Health, and Environment (SSHE) events
• Responsible for communicating oi Systems (oi System (oi) ) expectations on the rig site
• Monitors rig operations to provide feedback and input to the rig contractor to ensure well control procedures are properly followed and emergency situations are appropriately managed
• Responsible for ensuring that safety, operational, environmental, security and other drills are conducted on site at specified frequencies
• Responsible for ensuring drilling and completion procedures are followed as approved and utilizes management of change processes if changes are required
• Orders and organizes logistics for services and equipment necessary to conduct drilling and completion operations efficiently
• Supports onsite surveillance requirements for the operation in areas such as kick detection, abnormal pressure detection, torque & drag, mud properties, and solids control efficiency
• Responsible for generation of accurate and adequate operations reports
• Interfaces with engineering and geology to ensure understanding of well objectives and procedural requirements

Requirements

• Experience in rig supervisory or rig leadership roles for drilling and completion operations
• Experience working for a major Operator or Drilling Contractor
• Hold current certification for Well Control

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the position as subject of email.

Job Title: Drilling Logistics Lead III

Location: Abia
Job type: Full-time (On-site)

Main Functions

• The Drilling Logistics Supervisor, as part of the Projects, Drilling & Exploration Procurement group, has overall responsibilities for providing logistical and materials management services.
• Manages the day-to-day logistical business, including, but not limited to, implementing logistics strategies, supervising drilling logistics contractor staff, material control functions, inventory management, and coordinating material movements to offshore or onshore rig locations.
• The drilling supervisor works under the day to day direction of the Drilling Operations Superintendent in-country, and is responsible to the Drilling Superintendent for functional matters.

Task and Responsibilities
In addition to all Level 1 and 2 tasks, a Level 3 will:

• Receives Drilling Programs for each Rig / Well to determine / list equipment / tools / materials requirements according to Drilling Instructions / Equipment Allocations and ensures satisfying sites daily requirements.
• Maintains appropriate and safe storage of the Company’s owned drilling equipment / tools and ensures timely replenishment through purchase / fabrication / repairs by contracted companies.

Requirements

• Experience in supply and logistics, preferably in international frontier operations
• Experience working in Operations, preferably Drilling support activities and related materials, equipment and services
• Associates Degree plus formal training mechanical trades.
• Experienced in starting up new operations in a truly remote frontier region
• Experience in material handling equipment (cranes, forklifts)
• Must be able to demonstrate sound ethical practices in the supervision of local labor, inventory control, oil field accounting, and contract administration
• Strong analytical and communication skills; Good interpersonal / team skills
• Must be extremely flexible and adaptable to various working and living conditions
• Ability to handle multiple priorities and stakeholders
• Must be proficient in the use of computers and possess excellent administrative and organizational competencies

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the position as subject of email.

Job Title: Mechanical Technician III

Location: Abia

Main Functions

• Technicians are assigned to carry out maintenance work.
• This can either be an Company (XOM) employee or a Contractor resource. Typically reports to a supervisor.

Tasks and Responsibilities

• Estimates work load to establish completion dates.
• Assists mechanical engineers in the planning and testing of mechanical components, equipment, and machinery, such as engines, instruments, controls, robots, machines, etc.
• Helps prepare proposals and cost estimates.
• Actively participate in the use of all on the job safety tools
• Review job packs
• Identify any safety issues associated with job end ensure removal/mitigation prior to working
• Execute work as planned
• Record technical history as required by workgroup. (Global Reliability Tool (GRT), data sheet, etc.)
• Provide feedback on job pack improvements to Execution FLS
• Request permits and notify Supervisor if permit cannot be issued within 30 minutes of requested time

Skills and Qualifications

• Discipline appropriate certification(s) if applicable or equivalent professional experience
• Strong communication skills; ability to clearly and concisely describe conditions in the field and recommend remediation steps
• Team Player; exhibits effective teamwork when working with persons over whom the person may have no direct authority and willingness to assist others
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should send their CV to: infonnec1@nnecltd.com using the Job Title as the subject of the email.

Job Title: Completions Engineer III

Location: Abia

Main Functions

• Prepare detailed engineering designs and coordinate all phases of planning and completing a well
• Ensure the geological and reservoir objectives of the well are met while assuring the highest standards of engineering integrity, safety, and environmental protection are applied to the well design and execution.
• Prepare designs and well plans representing the optimal costs and investments for the wells.
• In a Technical role, provide review and support to Drill team designs and operations described in the MAIN FUNCTIONS: above, as well as evaluate and progress new technology. Could include subsea technology.

Responsibilities
In addition to the Level 1 and 2 tasks, a Level 3 Completions Engineer must:

• Facilitate the preparation and monitor capital budgets relating to completions and well design.
• Ensure accurate and sustainable quality of data for timing projects
• Interact daily with completion foreman, drilling leadership, etc.
• Interact with completion Service Company representing to improve efficiency operations and cost out lays
• Identify and apply industry best practices as applicable
• Work in conjunction with safety, environmental and field operations personnel to optimize safety performance.

Requirements

• BSc Degree in Engineering or related technical discipline
• Broad and extensive knowledge of completions design, equipment, operations, standards and specifications. This could include subsea systems technology.
• Strong personal effectiveness in leadership, communications, interpersonal skills, and teamwork
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications

Specific Requirements:

• Extensive well management expertise and advanced proficiency in the following skill areas:
• Wellbore Hydraulics
• Well Performance
• Completion Design
• Workover Design
• Fluid Flow & Hydraulics
• Well Integrity Management
• Operations Support and Surveillance
• Artificial Lift, Subsurface Equipment, Wellheads
• Trees & Surface Equipment, Wellwork Units, Surveillance & Optimization, Maintenance & Reliability System, Well Surveillance and Well Performance, Capacity Enhancement and Operations Support and Surveillance

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should send their CV to: infonnec1@nnecltd.com using the Job Title as the subject of the email.

Job Title: Drilling / Well Intervention Subsea Advisor III

Location: Abia
Job type: Full-time (On-site)

Main Functions

• Comment and provide advice on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
• Facilitates effective execution of discipline engineering and design routines that align with the team’s goals, objectives, and procedures.
• Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues.
• In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Tasks and Responsibilities

• Company representative for interfacing with subsea tree, hangers, and wellhead interfacing and subsea pressure control equipment (e.g., subsea BOPs, SSTT, CWOR, LWI) for subsea drilling, completion, and/or well interventions during planning and execution phases.
• Lead in coordinating surface integrity tests (SITs), witnessing any recertification, factory acceptance and extended factory acceptance testing (FAT / EFAT).
• Coordinating subsea equipment & ROV aspects of drilling, completions, and/or well intervention risk assessments
• Prepare brownfield survey and subsea equipment (e.g., trees, hangers, wellheads, subsea BOPs, SSTT / landing strings, CWOR, LWI) deployment and retrieval procedures, ROV tooling and related procedures.
• Monitor subsea equipment service provider, ROV service provider, provide project management support and troubleshooting of subsea pressure control equipment issues

Requirements

• Previous experience in a closely related position
• Extensive knowledge of In-depth understanding of subsea completion, workover and light well intervention units (e.g. semi submersibles, jack ups and multipurpose vessels)
• Develops / manages project interfaces (e.g. subsea simultaneous drilling and production procedures, interfaces with other subsea systems)
• Keeps abreast of subsea completions and workover techniques and technology progress within EM and industry, applies emerging technology and practices where appropriate and can use Tech Set applications effectively
• Experienced in the areas of subsea system hydraulic modeling, well surveillance, well testing operations, multiphase metering, subsea production / artificial lift optimization (e.g. subsea booster pumps, gas lift and riser lift) and flow assurance
• Very strong demonstrated organizational and technical judgment skills
• Demonstrated teamwork and communication skills
• Demonstrated skills to positively influence drilling workforce – employees and contractors
• Exceptional skills in MS Office suite of software programs; Word, Excel, PowerPoint, Outlook, etc.
• Read, write, and speak fluent English, especially as it applies to technical/business communications
• Ability to work and communicate in international locales and with diverse cultures
• Relevant industry experience (offshore / onshore drilling activities, for example).
• Maintains a high degree of ethical conduct.
• Ability to work in harsh environments (examples include temperature and / or humidity extremes, remote locations with limited amenities) with changing priorities.
• Willingness to travel / live away from home for extended time periods.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the position as subject of email.

Job Title: Geophysicist III

Location: Abia
Job type: Full-time (On-site)

Main Functions

• Supports and enhances 2D/3D seismic and wellbore acquisition programs across company.
• Will interface with the operating groups, other technical specialists, and vendors to provide 2D/3D seismic and borehole seismic survey acquisition solutions which safely meet organizational goals and commitments.
• May serve as a Formation Evaluation Specialist.

Task and Responsibilities
In addition to the Level 1 and 2 tasks and responsibilities, a Level 3:

• Experienced with post-stack and pre-stack seismic inversion / AVO
• Experience in seismic attribute analysis to define structural and depositional environment/facies
• Strong experience with carbonates
• Application of geophysics to unconventional plays experience.

Requirements

• Candidates should possess a Bachelor’s or Advanced Degree in Geotechnical or Geophysical required
• Previous experience in a closely related position
• Geology & Geophysical interpretation skills
• Advance Petrophysical analysis skills in Siliciclastic settings
• Competency in computing applications (Geology & Petrel)
• Strong knowledge of the Petroleum Geology of the local area at a basic minimum
• Geoscience computing skills
• Good team player, ability to work effectively in and with diverse work groups
• Strong mentoring and coaching skills
• Experience in interpreting gravity and magnetic data.
• Sound knowledge in seismic processing and seismic acquisition operations.
• Strong structural geology background with experience in all tectonic systems, in all geologic environments and all reservoir types.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the position as subject of email.

Job Title: Developer II

Location: Abia

Responsibilities

• Responsible for the design, development and maintenance of software applications across a broad technology portfolio.
• Supports testing, debugging, and refining the applications to produce the required product. Devises and provides programming solution approaches to problems and issues.
• Helps prepare both program-level and user-level documentation.
• Works with moderate work direction and is skilled and knowledgeable to the position.
• This position would typically include senior Developer who is able to perform tasks of high complexity and difficulty.
• Such individual could also manage and train other team members and lead projects.

Requirement

• Proficiency in project-specific tools, applications and languages. Software Development Lifecycle (SDLC) experience.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should forward their CV to: infonnec1@nnecltd.com using the Job Title as subject of email.